mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/
synced 2026-04-17 22:23:45 -04:00
189ccdc7e8
The samsung,s2mpg10-pmic binding is going to acquire various additional properties. To avoid making the common samsung,s2mps11 binding file too complicated due to additional nesting, split s2mpg10 out into its own file. As a side-effect, the oneOf for the interrupts is not required anymore, as the required: node is at the top-level now. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-4-3b1f9831fffd@linaro.org Signed-off-by: Lee Jones <lee@kernel.org>
281 lines
7.5 KiB
YAML
281 lines
7.5 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/mfd/samsung,s2mps11.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Samsung S2MPS11/13/14/15 and S2MPU02 Power Management IC
|
|
|
|
maintainers:
|
|
- Krzysztof Kozlowski <krzk@kernel.org>
|
|
|
|
description: |
|
|
This is a part of device tree bindings for S2M and S5M family of Power
|
|
Management IC (PMIC).
|
|
|
|
The Samsung S2MPS11/13/14/15 and S2MPU02 is a family of Power Management IC
|
|
which include voltage and current regulators, RTC, clock outputs and other
|
|
sub-blocks.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- samsung,s2mps11-pmic
|
|
- samsung,s2mps13-pmic
|
|
- samsung,s2mps14-pmic
|
|
- samsung,s2mps15-pmic
|
|
- samsung,s2mpu02-pmic
|
|
- samsung,s2mpu05-pmic
|
|
|
|
clocks:
|
|
$ref: /schemas/clock/samsung,s2mps11.yaml
|
|
description:
|
|
Child node describing clock provider.
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
regulators:
|
|
type: object
|
|
description:
|
|
List of child nodes that specify the regulators.
|
|
|
|
samsung,s2mps11-acokb-ground:
|
|
description: |
|
|
Indicates that ACOKB pin of S2MPS11 PMIC is connected to the ground so
|
|
the PMIC must manually set PWRHOLD bit in CTRL1 register to turn off the
|
|
power. Usually the ACOKB is pulled up to VBATT so when PWRHOLD pin goes
|
|
low, the rising ACOKB will trigger power off.
|
|
type: boolean
|
|
|
|
samsung,s2mps11-wrstbi-ground:
|
|
description: |
|
|
Indicates that WRSTBI pin of PMIC is pulled down. When the system is
|
|
suspended it will always go down thus triggering unwanted buck warm
|
|
reset (setting buck voltages to default values).
|
|
type: boolean
|
|
|
|
wakeup-source: true
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- regulators
|
|
|
|
additionalProperties: false
|
|
|
|
allOf:
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: samsung,s2mps11-pmic
|
|
then:
|
|
properties:
|
|
regulators:
|
|
$ref: /schemas/regulator/samsung,s2mps11.yaml
|
|
samsung,s2mps11-wrstbi-ground: false
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: samsung,s2mps13-pmic
|
|
then:
|
|
properties:
|
|
regulators:
|
|
$ref: /schemas/regulator/samsung,s2mps13.yaml
|
|
samsung,s2mps11-acokb-ground: false
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: samsung,s2mps14-pmic
|
|
then:
|
|
properties:
|
|
regulators:
|
|
$ref: /schemas/regulator/samsung,s2mps14.yaml
|
|
samsung,s2mps11-acokb-ground: false
|
|
samsung,s2mps11-wrstbi-ground: false
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: samsung,s2mps15-pmic
|
|
then:
|
|
properties:
|
|
regulators:
|
|
$ref: /schemas/regulator/samsung,s2mps15.yaml
|
|
samsung,s2mps11-acokb-ground: false
|
|
samsung,s2mps11-wrstbi-ground: false
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: samsung,s2mpu02-pmic
|
|
then:
|
|
properties:
|
|
regulators:
|
|
$ref: /schemas/regulator/samsung,s2mpu02.yaml
|
|
samsung,s2mps11-acokb-ground: false
|
|
samsung,s2mps11-wrstbi-ground: false
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: samsung,s2mpu05-pmic
|
|
then:
|
|
properties:
|
|
regulators:
|
|
$ref: /schemas/regulator/samsung,s2mpu05.yaml
|
|
samsung,s2mps11-acokb-ground: false
|
|
samsung,s2mps11-wrstbi-ground: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pmic@66 {
|
|
compatible = "samsung,s2mps11-pmic";
|
|
reg = <0x66>;
|
|
|
|
interrupt-parent = <&gpx0>;
|
|
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&s2mps11_irq>;
|
|
samsung,s2mps11-acokb-ground;
|
|
wakeup-source;
|
|
|
|
clocks {
|
|
compatible = "samsung,s2mps11-clk";
|
|
#clock-cells = <1>;
|
|
clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt";
|
|
};
|
|
|
|
regulators {
|
|
LDO1 {
|
|
regulator-name = "vdd_ldo1";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
LDO4 {
|
|
regulator-name = "vdd_adc";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
// ....
|
|
|
|
BUCK1 {
|
|
regulator-name = "vdd_mif";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
BUCK2 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-coupled-with = <&buck3_reg>;
|
|
regulator-coupled-max-spread = <300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
BUCK3 {
|
|
regulator-name = "vdd_int";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-coupled-with = <&buck2_reg>;
|
|
regulator-coupled-max-spread = <300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
// ...
|
|
};
|
|
};
|
|
};
|
|
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pmic@66 {
|
|
compatible = "samsung,s2mps14-pmic";
|
|
reg = <0x66>;
|
|
|
|
interrupt-parent = <&gpx0>;
|
|
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
|
wakeup-source;
|
|
|
|
clocks {
|
|
compatible = "samsung,s2mps14-clk";
|
|
#clock-cells = <1>;
|
|
clock-output-names = "s2mps14_ap", "unused", "s2mps14_bt";
|
|
};
|
|
|
|
regulators {
|
|
LDO1 {
|
|
regulator-name = "VLDO1_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
// ...
|
|
|
|
BUCK1 {
|
|
regulator-name = "VBUCK1_1.0V";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
// ...
|
|
};
|
|
};
|
|
};
|