Commit 0c5b1016 authored by Neil Armstrong's avatar Neil Armstrong Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: sm8650-qrd: add interconnect dependent device nodes 



Now interconnect dependent devices are added in sm8650 DTSI,
now enable more devices for the Qualcomm SM8650 QRD board:
- PCIe
- Display
- DSPs
- SDCard
- UFS
- USB role switch with PMIC Glink
- Bluetooth

Reviewed-by: default avatarKonrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: default avatarNeil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-8-b25fb781da52@linaro.org


Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent deb63527

arch/arm64/boot/dts/qcom/sm8650-qrd.dts

+274 −1
Original line number Diff line number Diff line
@@ -23,6 +23,7 @@ / { 


	aliases {

		serial0 = &uart15;

		serial1 = &uart14;

	};



	chosen {
@@ -45,6 +46,44 @@ key-volume-up { 
		};

	};



	pmic-glink {

		compatible = "qcom,sm8650-pmic-glink",

			     "qcom,sm8550-pmic-glink",

			     "qcom,pmic-glink";

		#address-cells = <1>;

		#size-cells = <0>;

		orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;



		connector@0 {

			compatible = "usb-c-connector";

			reg = <0>;



			power-role = "dual";

			data-role = "dual";



			ports {

				#address-cells = <1>;

				#size-cells = <0>;



				port@0 {

					reg = <0>;



					pmic_glink_hs_in: endpoint {

						remote-endpoint = <&usb_1_dwc3_hs>;

					};

				};



				port@1 {

					reg = <1>;



					pmic_glink_ss_in: endpoint {

						remote-endpoint = <&usb_1_dwc3_ss>;

					};

				};

			};

		};

	};



	vph_pwr: vph-pwr-regulator {

		compatible = "regulator-fixed";
@@ -399,6 +438,81 @@ vreg_l3i_1p2: ldo3 { 
	};

};



&dispcc {

	status = "okay";

};



&gpi_dma1 {

	status = "okay";

};



&mdss {

	status = "okay";

};



&mdss_dsi0 {

	vdda-supply = <&vreg_l3i_1p2>;



	status = "okay";



	panel@0 {

		compatible = "visionox,vtdr6130";

		reg = <0>;



		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;



		vddio-supply = <&vreg_l12b_1p8>;

		vci-supply = <&vreg_l13b_3p0>;

		vdd-supply = <&vreg_l11b_1p2>;



		pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;

		pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;

		pinctrl-names = "default", "sleep";



		port {

			panel0_in: endpoint {

				remote-endpoint = <&mdss_dsi0_out>;

			};

		};

	};

};



&mdss_dsi0_out {

	remote-endpoint = <&panel0_in>;

	data-lanes = <0 1 2 3>;

};



&mdss_dsi0_phy {

	vdds-supply = <&vreg_l1i_0p88>;



	status = "okay";

};



&mdss_mdp {

	status = "okay";

};



&pcie_1_phy_aux_clk {

	clock-frequency = <1000>;

};



&pcie0 {

	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;

	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;



	pinctrl-0 = <&pcie0_default_state>;

	pinctrl-names = "default";



	status = "okay";

};



&pcie0_phy {

	vdda-phy-supply = <&vreg_l1i_0p88>;

	vdda-pll-supply = <&vreg_l3i_1p2>;



	status = "okay";

};



&pon_pwrkey {

	status = "okay";

};
@@ -479,23 +593,173 @@ &pmk8550_rtc { 
	status = "okay";

};



&qupv3_id_0 {

	status = "okay";

};



&qupv3_id_1 {

	status = "okay";

};



&remoteproc_adsp {

	firmware-name = "qcom/sm8650/adsp.mbn",

			"qcom/sm8650/adsp_dtb.mbn";



	status = "okay";

};



&remoteproc_cdsp {

	firmware-name = "qcom/sm8650/cdsp.mbn",

			"qcom/sm8650/cdsp_dtb.mbn";



	status = "okay";

};



&remoteproc_mpss {

	firmware-name = "qcom/sm8650/modem.mbn",

			"qcom/sm8650/modem_dtb.mbn";



	status = "okay";

};



&sleep_clk {

	clock-frequency = <32000>;

};



&spi4 {

	status = "okay";



	touchscreen@0 {

		compatible = "goodix,gt9916";

		reg = <0>;



		interrupt-parent = <&tlmm>;

		interrupts = <162 IRQ_TYPE_LEVEL_LOW>;



		reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>;



		avdd-supply = <&vreg_l14b_3p2>;



		spi-max-frequency = <1000000>;



		touchscreen-size-x = <1080>;

		touchscreen-size-y = <2400>;



		pinctrl-0 = <&ts_irq>, <&ts_reset>;

		pinctrl-names = "default";

	};

};



&tlmm {

	/* Reserved I/Os for NFC */

	gpio-reserved-ranges = <32 8>;



	bt_default: bt-default-state {

		bt-en-pins {

			pins = "gpio17";

			function = "gpio";

			drive-strength = <16>;

			bias-disable;

		};



		sw-ctrl-pins {

			pins = "gpio18";

			function = "gpio";

			bias-pull-down;

		};

	};



	disp0_reset_n_active: disp0-reset-n-active-state {

		pins = "gpio133";

		function = "gpio";

		drive-strength = <8>;

		bias-disable;

	};



	disp0_reset_n_suspend: disp0-reset-n-suspend-state {

		pins = "gpio133";

		function = "gpio";

		drive-strength = <2>;

		bias-pull-down;

	};



	mdp_vsync_active: mdp-vsync-active-state {

		pins = "gpio86";

		function = "mdp_vsync";

		drive-strength = <2>;

		bias-pull-down;

	};



	mdp_vsync_suspend: mdp-vsync-suspend-state {

		pins = "gpio86";

		function = "mdp_vsync";

		drive-strength = <2>;

		bias-pull-down;

	};



	ts_irq: ts-irq-state {

		pins = "gpio161";

		function = "gpio";

		drive-strength = <8>;

		bias-pull-up;

		output-disable;

	};



	ts_reset: ts-reset-state {

		pins = "gpio162";

		function = "gpio";

		drive-strength = <8>;

		bias-pull-up;

	};

};



&uart14 {

	status = "okay";



	bluetooth {

		compatible = "qcom,wcn7850-bt";



		clocks = <&rpmhcc RPMH_RF_CLK1>;



		vddio-supply = <&vreg_l3c_1p2>;

		vddaon-supply = <&vreg_l15b_1p8>;

		vdddig-supply = <&vreg_s3c_0p9>;

		vddrfa0p8-supply = <&vreg_s3c_0p9>;

		vddrfa1p2-supply = <&vreg_s1c_1p2>;

		vddrfa1p9-supply = <&vreg_s6c_1p8>;



		max-speed = <3200000>;



		enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;

		swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;



		pinctrl-0 = <&bt_default>;

		pinctrl-names = "default";

	};

};



&uart15 {

	status = "okay";

};



&ufs_mem_hc {

	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;



	vcc-supply = <&vreg_l17b_2p5>;

	vcc-max-microamp = <1300000>;

	vccq-supply = <&vreg_l1c_1p2>;

	vccq-max-microamp = <1200000>;



	status = "okay";

};



&ufs_mem_phy {

	vdda-phy-supply = <&vreg_l1d_0p88>;

	vdda-pll-supply = <&vreg_l3i_1p2>;



	status = "okay";

};



/*

 * DPAUX -> WCD9395 -> USB_SBU -> USB-C

 * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
@@ -507,7 +771,16 @@ &usb_1 { 
};



&usb_1_dwc3 {

	dr_mode = "peripheral";

	dr_mode = "otg";

	usb-role-switch;

};



&usb_1_dwc3_hs {

	remote-endpoint = <&pmic_glink_hs_in>;

};



&usb_1_dwc3_ss {

	remote-endpoint = <&pmic_glink_ss_in>;

};



&usb_1_hsphy {