Commit 27cb8f70 authored by Binbin Zhou's avatar Binbin Zhou Committed by Bartosz Golaszewski
Browse files

gpio: loongson-64bit: Extend GPIO irq support 



Add the interrupt enable register offset (inten_offset) so that GPIO
interrupts can be enabled normally on more models.

According to the latest interface specifications, the definition of GPIO
interrupts in ACPI is similar to that in FDT. The GPIO interrupts are
listed one by one according to the GPIO number, and the corresponding
interrupt number can be obtained directly through the GPIO number
specified by the consumer.

Signed-off-by: default avatarXi Ruoyao <xry111@xry111.site>
Signed-off-by: default avatarBinbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: default avatarHuacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250714064542.2276247-1-zhoubinbin@loongson.cn


[Bartosz: tweaked the commit message]
Signed-off-by: default avatarBartosz Golaszewski <bartosz.golaszewski@linaro.org>
parent 5103fbb7

drivers/gpio/gpio-loongson-64bit.c

+6 −0
Original line number Diff line number Diff line
@@ -222,6 +222,7 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data0 = { 
	.conf_offset = 0x0,

	.in_offset = 0xc,

	.out_offset = 0x8,

	.inten_offset = 0x14,

};



static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data1 = {
@@ -230,6 +231,7 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data1 = { 
	.conf_offset = 0x0,

	.in_offset = 0x20,

	.out_offset = 0x10,

	.inten_offset = 0x30,

};



static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data2 = {
@@ -246,6 +248,7 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls3a5000_data = { 
	.conf_offset = 0x0,

	.in_offset = 0xc,

	.out_offset = 0x8,

	.inten_offset = 0x14,

};



static const struct loongson_gpio_chip_data loongson_gpio_ls7a_data = {
@@ -254,6 +257,7 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls7a_data = { 
	.conf_offset = 0x800,

	.in_offset = 0xa00,

	.out_offset = 0x900,

	.inten_offset = 0xb00,

};



/* LS7A2000 chipset GPIO */
@@ -263,6 +267,7 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls7a2000_data0 = { 
	.conf_offset = 0x800,

	.in_offset = 0xa00,

	.out_offset = 0x900,

	.inten_offset = 0xb00,

};



/* LS7A2000 ACPI GPIO */
@@ -281,6 +286,7 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls3a6000_data = { 
	.conf_offset = 0x0,

	.in_offset = 0xc,

	.out_offset = 0x8,

	.inten_offset = 0x14,

};



static const struct of_device_id loongson_gpio_of_match[] = {