Commit 2cf5ec58 authored by Luca Weiss's avatar Luca Weiss Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: qcm6490-fairphone-fp5: Configure PM8008 regulators 



PM8008 regulators are used for the cameras found on FP5. Configure the
chip and its voltages.

Signed-off-by: default avatarLuca Weiss <luca.weiss@fairphone.com>
Reviewed-by: default avatarDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240621-fp4-fp5-pm8008-v1-2-dbedcd6f00f1@fairphone.com


Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent d315b45a

arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts

+104 −1
Original line number Diff line number Diff line
@@ -207,6 +207,25 @@ active-config0 { 
			};

		};



		pm8008-thermal {

			polling-delay-passive = <100>;

			thermal-sensors = <&pm8008>;



			trips {

				trip0 {

					temperature = <95000>;

					hysteresis = <0>;

					type = "passive";

				};



				trip1 {

					temperature = <115000>;

					hysteresis = <0>;

					type = "critical";

				};

			};

		};



		quiet-thermal {

			polling-delay-passive = <0>;
@@ -557,7 +576,76 @@ &gpi_dma1 { 
&i2c1 {

	status = "okay";



	/* PM8008 PMIC @ 8 and 9 */

	pm8008: pmic@8 {

		compatible = "qcom,pm8008";

		reg = <0x8>;



		interrupts-extended = <&tlmm 25 IRQ_TYPE_EDGE_RISING>;

		reset-gpios = <&pm8350c_gpios 3 GPIO_ACTIVE_LOW>;



		vdd-l1-l2-supply = <&vreg_s8b>;

		vdd-l3-l4-supply = <&vreg_bob>;

		vdd-l5-supply = <&vreg_bob>;

		vdd-l6-supply = <&vreg_s1b>;

		vdd-l7-supply = <&vreg_bob>;



		pinctrl-names = "default";

		pinctrl-0 = <&pm8008_int_default>, <&pm8008_reset_n_default>;



		gpio-controller;

		#gpio-cells = <2>;

		gpio-ranges = <&pm8008 0 0 2>;



		interrupt-controller;

		#interrupt-cells = <2>;



		#thermal-sensor-cells = <0>;



		regulators {

			vreg_l1p: ldo1 {

				regulator-name = "vreg_l1p";

				regulator-min-microvolt = <1000000>;

				regulator-max-microvolt = <1200000>;

			};



			vreg_l2p: ldo2 {

				regulator-name = "vreg_l2p";

				regulator-min-microvolt = <950000>;

				regulator-max-microvolt = <1152000>;

			};



			vreg_l3p: ldo3 {

				regulator-name = "vreg_l3p";

				regulator-min-microvolt = <2700000>;

				regulator-max-microvolt = <3000000>;

			};



			vreg_l4p: ldo4 {

				regulator-name = "vreg_l4p";

				regulator-min-microvolt = <2700000>;

				regulator-max-microvolt = <2900000>;

			};



			vreg_l5p: ldo5 {

				regulator-name = "vreg_l5p";

				regulator-min-microvolt = <2704000>;

				regulator-max-microvolt = <2900000>;

			};



			vreg_l6p: ldo6 {

				regulator-name = "vreg_l6p";

				regulator-min-microvolt = <1700000>;

				regulator-max-microvolt = <1904000>;

			};



			vreg_l7p: ldo7 {

				regulator-name = "vreg_l7p";

				regulator-min-microvolt = <2700000>;

				regulator-max-microvolt = <3000000>;

			};

		};

	};



	/* Pixelworks @ 26 */

	/* FSA4480 USB audio switch @ 42 */

	/* AW86927FCR haptics @ 5a */
@@ -688,6 +776,14 @@ wide-rfc-therm@4 { 
	};

};



&pm8350c_gpios {

	pm8008_reset_n_default: pm8008-reset-n-default-state {

		pins = "gpio3";

		function = PMIC_GPIO_FUNC_NORMAL;

		bias-pull-down;

	};

};



&pmk8350_rtc {

	status = "okay";

};
@@ -845,6 +941,13 @@ hall_sensor_default: hall-sensor-default-state { 
		bias-pull-up;

	};



	pm8008_int_default: pm8008-int-default-state {

		pins = "gpio25";

		function = "gpio";

		drive-strength = <2>;

		bias-disable;

	};



	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {

		pins = "gpio28";

		function = "gpio";