Commit 818c2676 authored by Bartosz Golaszewski's avatar Bartosz Golaszewski Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: sa8775p-ride-r3: add new board file 



Revision 3 of the sa8775p-ride board uses a different PHY for the two
ethernet ports and supports 2.5G speed. Create a new file for the board
reflecting the changes.

Signed-off-by: default avatarBartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: default avatarKonrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240627114212.25400-4-brgl@bgdev.pl


Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent fe156311

arch/arm64/boot/dts/qcom/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -113,6 +113,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb 
dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-ride.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride-r3.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb

arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts

0 → 100644
+47 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: BSD-3-Clause

/*

 * Copyright (c) 2023, Linaro Limited

 */



/dts-v1/;



#include "sa8775p-ride.dtsi"



/ {

	model = "Qualcomm SA8775P Ride Rev3";

	compatible = "qcom,sa8775p-ride-r3", "qcom,sa8775p";

};



&ethernet0 {

	phy-mode = "2500base-x";

};



&ethernet1 {

	phy-mode = "2500base-x";

};



&mdio {

	compatible = "snps,dwmac-mdio";

	#address-cells = <1>;

	#size-cells = <0>;



	sgmii_phy0: phy@8 {

		compatible = "ethernet-phy-id31c3.1c33";

		reg = <0x8>;

		device_type = "ethernet-phy";

		interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;

		reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;

		reset-assert-us = <11000>;

		reset-deassert-us = <70000>;

	};



	sgmii_phy1: phy@0 {

		compatible = "ethernet-phy-id31c3.1c33";

		reg = <0x0>;

		device_type = "ethernet-phy";

		interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;

		reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;

		reset-assert-us = <11000>;

		reset-deassert-us = <70000>;

	};

};