Commit 95f4fa1f authored by Jérémie Dautheribes's avatar Jérémie Dautheribes Committed by David S. Miller
Browse files

dt-bindings: net: dp83822: support configuring RMII master/slave mode 



Add property ti,rmii-mode to support selecting the RMII operation mode
between:
	- master mode (PHY operates from a 25MHz clock reference)
	- slave mode (PHY operates from a 50MHz clock reference)

If not set, the operation mode is configured by hardware straps.

Signed-off-by: default avatarJérémie Dautheribes <jeremie.dautheribes@bootlin.com>
Acked-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a7f08029

Documentation/devicetree/bindings/net/ti,dp83822.yaml

+16 −0
Original line number Diff line number Diff line
@@ -80,6 +80,22 @@ properties: 
           10625, 11250, 11875, 12500, 13125, 13750, 14375, 15000]

    default: 10000



  ti,rmii-mode:

    description: |

       If present, select the RMII operation mode. Two modes are

       available:

         - RMII master, where the PHY operates from a 25MHz clock reference,

         provided by a crystal or a CMOS-level oscillator

         - RMII slave, where the PHY operates from a 50MHz clock reference,

         provided by a CMOS-level oscillator

       The RMII operation mode can also be configured by its straps.

       If the strap pin is not set correctly or not set at all, then this can be

       used to configure it.

    $ref: /schemas/types.yaml#/definitions/string

    enum:

      - master

      - slave



required:

  - reg