Commit a64175fa authored by Pratyush Yadav's avatar Pratyush Yadav Committed by Hans Verkuil
Browse files

media: cadence: csi2rx: Set the STOP bit when stopping a stream



The stream stop procedure says that the STOP bit should be set when the
stream is to be stopped, and then the ready bit in stream status
register polled to make sure the STOP operation is finished.

Signed-off-by: default avatarPratyush Yadav <p.yadav@ti.com>
Tested-by: default avatarJulien Massot <julien.massot@collabora.com>
Reviewed-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: default avatarTomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: default avatarMaxime Ripard <mripard@kernel.org>
Signed-off-by: default avatarJai Luthra <j-luthra@ti.com>
Signed-off-by: default avatarSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
parent 6f28a427
Loading
Loading
Loading
Loading
+18 −1
Original line number Diff line number Diff line
@@ -8,6 +8,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_graph.h>
@@ -41,8 +42,12 @@

#define CSI2RX_STREAM_CTRL_REG(n)		(CSI2RX_STREAM_BASE(n) + 0x000)
#define CSI2RX_STREAM_CTRL_SOFT_RST			BIT(4)
#define CSI2RX_STREAM_CTRL_STOP				BIT(1)
#define CSI2RX_STREAM_CTRL_START			BIT(0)

#define CSI2RX_STREAM_STATUS_REG(n)		(CSI2RX_STREAM_BASE(n) + 0x004)
#define CSI2RX_STREAM_STATUS_RDY			BIT(31)

#define CSI2RX_STREAM_DATA_CFG_REG(n)		(CSI2RX_STREAM_BASE(n) + 0x008)
#define CSI2RX_STREAM_DATA_CFG_EN_VC_SELECT		BIT(31)
#define CSI2RX_STREAM_DATA_CFG_VC_SELECT(n)		BIT((n) + 16)
@@ -310,13 +315,25 @@ static int csi2rx_start(struct csi2rx_priv *csi2rx)
static void csi2rx_stop(struct csi2rx_priv *csi2rx)
{
	unsigned int i;
	u32 val;
	int ret;

	clk_prepare_enable(csi2rx->p_clk);
	reset_control_assert(csi2rx->sys_rst);
	clk_disable_unprepare(csi2rx->sys_clk);

	for (i = 0; i < csi2rx->max_streams; i++) {
		writel(0, csi2rx->base + CSI2RX_STREAM_CTRL_REG(i));
		writel(CSI2RX_STREAM_CTRL_STOP,
		       csi2rx->base + CSI2RX_STREAM_CTRL_REG(i));

		ret = readl_relaxed_poll_timeout(csi2rx->base +
						 CSI2RX_STREAM_STATUS_REG(i),
						 val,
						 !(val & CSI2RX_STREAM_STATUS_RDY),
						 10, 10000);
		if (ret)
			dev_warn(csi2rx->dev,
				 "Failed to stop streaming on pad%u\n", i);

		reset_control_assert(csi2rx->pixel_rst[i]);
		clk_disable_unprepare(csi2rx->pixel_clk[i]);