Commit c365a026 authored by Luca Weiss's avatar Luca Weiss Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: qcm6490-fairphone-fp5: Enable display 



Configure the MDSS nodes for the phone and add the panel node.

Signed-off-by: default avatarLuca Weiss <luca.weiss@fairphone.com>
Reviewed-by: default avatarKonrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: default avatarMarijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20250202-fp5-display-v1-1-f52bf546e38f@fairphone.com


Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent 588a6d00

arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts

+89 −5
Original line number Diff line number Diff line
@@ -138,6 +138,34 @@ vreg_ois_dvdd_1p1: regulator-ois-dvdd-1p1 { 
		vin-supply = <&vreg_s8b>;

	};



	vreg_oled_dvdd: regulator-oled-dvdd {

		compatible = "regulator-fixed";

		regulator-name = "oled_dvdd";

		regulator-min-microvolt = <1200000>;

		regulator-max-microvolt = <1200000>;



		gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;

		enable-active-high;



		vin-supply = <&vreg_s1b>;



		regulator-boot-on;

	};



	vreg_oled_vci: regulator-oled-vci {

		compatible = "regulator-fixed";

		regulator-name = "oled_vci";

		regulator-min-microvolt = <3000000>;

		regulator-max-microvolt = <3000000>;



		gpio = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;

		enable-active-high;



		vin-supply = <&vreg_l13c>;



		regulator-boot-on;

	};



	reserved-memory {

		cont_splash_mem: cont-splash@e1000000 {

			reg = <0x0 0xe1000000 0x0 0x2300000>;
@@ -597,11 +625,6 @@ eeprom@51 { 
	};

};



&dispcc {

	/* Disable for now so simple-framebuffer continues working */

	status = "disabled";

};



&gcc {

	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,

			   <GCC_EDP_CLKREF_EN>,
@@ -733,6 +756,46 @@ &ipa { 
	status = "okay";

};



&mdss {

	status = "okay";

};



&mdss_dsi {

	vdda-supply = <&vreg_l6b>;

	status = "okay";



	panel@0 {

		compatible = "fairphone,fp5-rm692e5-boe", "raydium,rm692e5";

		reg = <0>;



		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;



		vci-supply = <&vreg_oled_vci>;

		vddio-supply = <&vreg_l12c>;

		dvdd-supply = <&vreg_oled_dvdd>;



		pinctrl-0 = <&disp_reset_n_active>, <&mdp_vsync>;

		pinctrl-1 = <&disp_reset_n_suspend>, <&mdp_vsync>;

		pinctrl-names = "default", "sleep";



		port {

			panel_in: endpoint {

				remote-endpoint = <&mdss_dsi0_out>;

			};

		};

	};

};



&mdss_dsi0_out {

	data-lanes = <0 1 2 3>;

	remote-endpoint = <&panel_in>;

};



&mdss_dsi_phy {

	vdds-supply = <&vreg_l10c>;

	status = "okay";

};



&pm7250b_adc {

	pinctrl-0 = <&pm7250b_adc_default>;

	pinctrl-names = "default";
@@ -1015,6 +1078,20 @@ bluetooth_enable_default: bluetooth-enable-default-state { 
		bias-disable;

	};



	disp_reset_n_active: disp-reset-n-active-state {

		pins = "gpio44";

		function = "gpio";

		drive-strength = <8>;

		bias-disable;

	};



	disp_reset_n_suspend: disp-reset-n-suspend-state {

		pins = "gpio44";

		function = "gpio";

		drive-strength = <2>;

		bias-pull-down;

	};



	hall_sensor_default: hall-sensor-default-state {

		pins = "gpio155";

		function = "gpio";
@@ -1022,6 +1099,13 @@ hall_sensor_default: hall-sensor-default-state { 
		bias-pull-up;

	};



	mdp_vsync: mdp-vsync-state {

		pins = "gpio80";

		function = "mdp_vsync";

		drive-strength = <2>;

		bias-pull-down;

	};



	pm8008_int_default: pm8008-int-default-state {

		pins = "gpio25";

		function = "gpio";