Commit d4870850 authored Mar 06, 2026 by Konrad Dybcio Committed by Bjorn Andersson Mar 15, 2026

soc: qcom: pmic_glink_altmode: Fix SVID=DP && unconnected edge case



The commit referenced in Fixes started evaluating the value of
alt_port->mux_ctrl before checking the active SVID. This led to
drm_aux_hpd_bridge_notify() no longer being called for the 'DP unplug'
case.

Perhaps somewhat interestingly, the firmware sends a notification with
SVID=DP, mux_ctrl=MUX_CTRL_STATE_NO_CONN and pin_assignment=0 on
unplug. 'pin_assignment' was previously interpreted as a bitfield
excerpt from the second byte of the DP pg_altmode payload (and stored
as an u8).

That value is used in pmic_glink_altmode_sc8280xp_notify(), decremented
by 1 (DPAM_HPD_A). Previously, this would result in an u8 underflow
that would rollover to 0xff (which prior to the Fixes patch would have
caused a pmic_glink_altmode_safe() and 'disconnected' bridge
notification). That check was removed, without a replacement.

Resolve this issue by making sure the SID=DP && mux_ctrl=NO_CONN combo
once again results in a HPD bridge notification.

Fixes: 0539c5a6 ("soc: qcom: pmic_glink_altmode: Consume TBT3/USB4 mode notifications")
Reported-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Tested-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260306-topic-pgaltmode_fixup-v1-1-ec154b2d8e89@oss.qualcomm.com


Signed-off-by: Bjorn Andersson <andersson@kernel.org>

parent 641f6fda

drivers/soc/qcom/pmic_glink_altmode.c

+11 −7

Original line number	Diff line number	Diff line
		@@ -350,15 +350,17 @@ static void pmic_glink_altmode_worker(struct work_struct *work)

		typec_switch_set(alt_port->typec_switch, alt_port->orientation);

		if (alt_port->mux_ctrl == MUX_CTRL_STATE_NO_CONN) {
		pmic_glink_altmode_safe(altmode, alt_port);
		} else if (alt_port->svid == USB_TYPEC_TBT_SID) {
		if (alt_port->svid == USB_TYPEC_TBT_SID) {
		pmic_glink_altmode_enable_tbt(altmode, alt_port);
		} else if (alt_port->svid == USB_TYPEC_DP_SID) {
		if (alt_port->mux_ctrl == MUX_CTRL_STATE_NO_CONN) {
		pmic_glink_altmode_safe(altmode, alt_port);
		} else {
		pmic_glink_altmode_enable_dp(altmode, alt_port,
		alt_port->mode,
		alt_port->hpd_state,
		alt_port->hpd_irq);
		}

		if (alt_port->hpd_state)
		conn_status = connector_status_connected;
		@@ -368,6 +370,8 @@ static void pmic_glink_altmode_worker(struct work_struct *work)
		drm_aux_hpd_bridge_notify(&alt_port->bridge->dev, conn_status);
		} else if (alt_port->mux_ctrl == MUX_CTRL_STATE_TUNNELING) {
		pmic_glink_altmode_enable_usb4(altmode, alt_port);
		} else if (alt_port->mux_ctrl == MUX_CTRL_STATE_NO_CONN) {
		pmic_glink_altmode_safe(altmode, alt_port);
		} else {
		pmic_glink_altmode_enable_usb(altmode, alt_port);
		}