Loading Documentation/dvb/bt8xx.txt +9 −20 Original line number Diff line number Diff line Loading @@ -17,34 +17,23 @@ Because of this, you need to enable "Device drivers" => "Multimedia devices" => "Video For Linux" => "BT848 Video For Linux" Furthermore you need to enable "Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" => "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards" 2) Loading Modules ================== In general you need to load the bttv driver, which will handle the gpio and i2c communication for us. Next you need the common dvb-bt8xx device driver and one frontend driver. The bttv driver will HANG YOUR SYSTEM IF YOU DO NOT SPECIFY THE CORRECT CARD ID! (If you don't get your card running and you suspect that the card id you're using is wrong, have a look at "bttv-cards.c" for a list of possible card ids.) Pay attention to failures when you load the frontend drivers (e.g. dmesg, /var/log/messages). i2c communication for us, plus the common dvb-bt8xx device driver. The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver. 3a) Nebula / Pinnacle PCTV -------------------------- $ modprobe bttv i2c_hw=1 card=0x68 $ modprobe dvb-bt8xx For Nebula cards use the "nxt6000" frontend driver: $ modprobe nxt6000 For Pinnacle PCTV cards use the "cx24110" frontend driver: $ modprobe cx24110 $ modprobe bttv (normally bttv is being loaded automatically by kmod) $ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading) 3b) TwinHan ----------- Loading Loading
Documentation/dvb/bt8xx.txt +9 −20 Original line number Diff line number Diff line Loading @@ -17,34 +17,23 @@ Because of this, you need to enable "Device drivers" => "Multimedia devices" => "Video For Linux" => "BT848 Video For Linux" Furthermore you need to enable "Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" => "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards" 2) Loading Modules ================== In general you need to load the bttv driver, which will handle the gpio and i2c communication for us. Next you need the common dvb-bt8xx device driver and one frontend driver. The bttv driver will HANG YOUR SYSTEM IF YOU DO NOT SPECIFY THE CORRECT CARD ID! (If you don't get your card running and you suspect that the card id you're using is wrong, have a look at "bttv-cards.c" for a list of possible card ids.) Pay attention to failures when you load the frontend drivers (e.g. dmesg, /var/log/messages). i2c communication for us, plus the common dvb-bt8xx device driver. The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver. 3a) Nebula / Pinnacle PCTV -------------------------- $ modprobe bttv i2c_hw=1 card=0x68 $ modprobe dvb-bt8xx For Nebula cards use the "nxt6000" frontend driver: $ modprobe nxt6000 For Pinnacle PCTV cards use the "cx24110" frontend driver: $ modprobe cx24110 $ modprobe bttv (normally bttv is being loaded automatically by kmod) $ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading) 3b) TwinHan ----------- Loading