Commit e25834d7 authored by Luca Weiss's avatar Luca Weiss Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: Add The Fairphone (Gen. 6) 



Add a devicetree for The Fairphone (Gen. 6) smartphone, which is based
on the Milos/SM7635 SoC.

Supported functionality as of this initial submission:
* Debug UART
* Regulators (PM7550, PM8550VS, PMR735B, PM8008)
* Remoteprocs (ADSP, CDSP, MPSS, WPSS)
* Power Button, Volume Keys, Switch
* PMIC-GLINK (Charger, Fuel gauge, USB-C mode switching)
* Camera flash/torch LED
* SD card
* USB

Signed-off-by: default avatarLuca Weiss <luca.weiss@fairphone.com>
Reviewed-by: default avatarKonrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: default avatarDmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251210-sm7635-fp6-initial-v4-9-b05fddd8b45c@fairphone.com


Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent d9d59d10

arch/arm64/boot/dts/qcom/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -39,6 +39,7 @@ lemans-evk-camera-dtbs := lemans-evk.dtb lemans-evk-camera.dtbo 


dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk-camera-csi1-imx577.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk-camera.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= milos-fairphone-fp6.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= monaco-evk.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= msm8216-samsung-fortuna3g.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-acer-a1-724.dtb

arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts

0 → 100644
+790 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: BSD-3-Clause

/*

 * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com>

 */



/dts-v1/;



#define PMIV0104_SID 7



#include <dt-bindings/leds/common.h>

#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>

#include <dt-bindings/regulator/qcom,rpmh-regulator.h>

#include "milos.dtsi"

#include "pm7550.dtsi"

#include "pm8550vs.dtsi"

#include "pmiv0104.dtsi" /* PMIV0108 */

#include "pmk8550.dtsi" /* PMK7635 */

#include "pmr735b.dtsi"



/ {

	model = "The Fairphone (Gen. 6)";

	compatible = "fairphone,fp6", "qcom,milos";

	chassis-type = "handset";



	aliases {

		serial0 = &uart5;

	};



	gpio-keys {

		compatible = "gpio-keys";



		pinctrl-0 = <&volume_up_default>;

		pinctrl-names = "default";



		key-volume-up {

			label = "Volume Up";

			gpios = <&pm7550_gpios 6 GPIO_ACTIVE_LOW>;

			linux,code = <KEY_VOLUMEUP>;

		};



		switch {

			label = "Switch";

			gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>;

			linux,input-type = <EV_SW>;

			linux,code = <SW_MUTE_DEVICE>;

		};

	};



	pmic-glink {

		compatible = "qcom,milos-pmic-glink",

			     "qcom,sm8550-pmic-glink",

			     "qcom,pmic-glink";

		#address-cells = <1>;

		#size-cells = <0>;

		orientation-gpios = <&tlmm 131 GPIO_ACTIVE_HIGH>;



		connector@0 {

			compatible = "usb-c-connector";

			reg = <0>;



			power-role = "dual";

			data-role = "dual";



			ports {

				#address-cells = <1>;

				#size-cells = <0>;



				port@0 {

					reg = <0>;



					pmic_glink_hs_in: endpoint {

						remote-endpoint = <&usb_1_dwc3_hs>;

					};

				};

			};

		};

	};



	vreg_ff_afvdd_2p8: regulator-ff-afvdd-2p8 {

		compatible = "regulator-fixed";

		regulator-name = "ff_afvdd_2p8";

		regulator-min-microvolt = <2800000>;

		regulator-max-microvolt = <2800000>;

		startup-delay-us = <100>;



		gpio = <&tlmm 93 GPIO_ACTIVE_HIGH>;

		enable-active-high;



		vin-supply = <&vreg_bob>;

	};



	vreg_uw_afvdd_2p8: regulator-uw-afvdd-2p8 {

		compatible = "regulator-fixed";

		regulator-name = "uw_afvdd_2p8";

		regulator-min-microvolt = <2800000>;

		regulator-max-microvolt = <2800000>;

		startup-delay-us = <100>;



		gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;

		enable-active-high;



		vin-supply = <&vreg_bob>;

	};



	vreg_uw_dvdd: regulator-uw-dvdd {

		compatible = "regulator-fixed";

		regulator-name = "uw_dvdd";

		regulator-min-microvolt = <1200000>;

		regulator-max-microvolt = <1200000>;

		startup-delay-us = <100>;



		gpio = <&tlmm 28 GPIO_ACTIVE_HIGH>;

		enable-active-high;



		vin-supply = <&vreg_s1b>;

	};



	vreg_ois_avdd0_1p8: regulator-ois-avdd0-1p8 {

		compatible = "regulator-fixed";

		regulator-name = "ois_avdd0_1p8";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

		startup-delay-us = <100>;



		gpio = <&tlmm 27 GPIO_ACTIVE_HIGH>;

		enable-active-high;



		vin-supply = <&vreg_bob>;

	};



	vreg_ois_vdd: regulator-ois-vdd {

		compatible = "regulator-fixed";

		regulator-name = "ois_vdd";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		startup-delay-us = <100>;



		gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;

		enable-active-high;



		vin-supply = <&vph_pwr>;

	};



	vreg_oled_dvdd_1p2: regulator-oled-dvdd-1p2 {

		compatible = "regulator-fixed";

		regulator-name = "oled_dvdd_1p2";

		regulator-min-microvolt = <1200000>;

		regulator-max-microvolt = <1200000>;



		gpio = <&tlmm 54 GPIO_ACTIVE_HIGH>;

		enable-active-high;



		vin-supply = <&vreg_s2b>;



		regulator-boot-on;

	};



	vreg_s1j: regulator-pm3001a-s1j {

		compatible = "regulator-fixed";

		regulator-name = "pm3001a_s1j";

		regulator-min-microvolt = <2200000>;

		regulator-max-microvolt = <2200000>;

		startup-delay-us = <1000>;



		gpio = <&pmr735b_gpios 1 GPIO_ACTIVE_HIGH>;

		enable-active-high;



		vin-supply = <&vph_pwr>;



		pinctrl-0 = <&s1j_enable_default>;

		pinctrl-names = "default";

	};



	vreg_vtof_ldo_3p3: regulator-vtof-ldo-3p3 {

		compatible = "regulator-fixed";

		regulator-name = "vtof_ldo_3p3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		startup-delay-us = <100>;



		gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>;

		enable-active-high;



		vin-supply = <&vph_pwr>;

	};



	vph_pwr: regulator-vph-pwr {

		compatible = "regulator-fixed";



		regulator-name = "vph_pwr";

		regulator-min-microvolt = <3700000>;

		regulator-max-microvolt = <3700000>;



		regulator-always-on;

		regulator-boot-on;

	};



	thermal-zones {

		pm8008-thermal {

			polling-delay-passive = <100>;

			thermal-sensors = <&pm8008>;



			trips {

				trip0 {

					temperature = <95000>;

					hysteresis = <0>;

					type = "passive";

				};



				trip1 {

					temperature = <115000>;

					hysteresis = <0>;

					type = "critical";

				};

			};

		};

	};

};



&apps_rsc {

	regulators-0 {

		compatible = "qcom,pm7550-rpmh-regulators";



		vdd-l1-supply = <&vreg_s1b>;

		vdd-l2-l3-supply = <&vreg_s3b>;

		vdd-l4-l5-supply = <&vreg_s2b>;

		vdd-l6-supply = <&vreg_s2b>;

		vdd-l7-supply = <&vreg_s1b>;

		vdd-l8-supply = <&vreg_s1b>;

		vdd-l9-l10-supply = <&vreg_s1b>;

		vdd-l11-supply = <&vreg_s1b>;

		vdd-l12-l14-supply = <&vreg_bob>;

		vdd-l13-l16-supply = <&vreg_bob>;

		vdd-l15-l17-l18-l19-l20-l21-l22-l23-supply = <&vreg_bob>;

		vdd-s1-supply = <&vph_pwr>;

		vdd-s2-supply = <&vph_pwr>;

		vdd-s3-supply = <&vph_pwr>;

		vdd-s4-supply = <&vph_pwr>;

		vdd-s5-supply = <&vph_pwr>;

		vdd-s6-supply = <&vph_pwr>;



		qcom,pmic-id = "b";



		vreg_s1b: smps1 {

			regulator-name = "vreg_s1b";

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <2080000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_s2b: smps2 {

			regulator-name = "vreg_s2b";

			regulator-min-microvolt = <1256000>;

			regulator-max-microvolt = <1408000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_s3b: smps3 {

			regulator-name = "vreg_s3b";

			regulator-min-microvolt = <880000>;

			regulator-max-microvolt = <1040000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l2b: ldo2 {

			regulator-name = "vreg_l2b";

			regulator-min-microvolt = <880000>;

			regulator-max-microvolt = <912000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l3b: ldo3 {

			regulator-name = "vreg_l3b";

			regulator-min-microvolt = <880000>;

			regulator-max-microvolt = <912000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l4b: ldo4 {

			regulator-name = "vreg_l4b";

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l5b: ldo5 {

			regulator-name = "vreg_l5b";

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l7b: ldo7 {

			regulator-name = "vreg_l7b";

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l8b: ldo8 {

			regulator-name = "vreg_l8b";

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l9b: ldo9 {

			regulator-name = "vreg_l9b";

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l10b: ldo10 {

			regulator-name = "vreg_l10b";

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l11b: ldo11 {

			regulator-name = "vreg_l11b";

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l12b: ldo12 {

			regulator-name = "vreg_l12b";

			/*

			 * Skip voltage voting for UFS VCC.

			 */

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l13b: ldo13 {

			regulator-name = "vreg_l13b";

			regulator-min-microvolt = <2700000>;

			regulator-max-microvolt = <3300000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l14b: ldo14 {

			regulator-name = "vreg_l14b";

			regulator-min-microvolt = <3300000>;

			regulator-max-microvolt = <3304000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l15b: ldo15 {

			regulator-name = "vreg_l15b";

			regulator-min-microvolt = <3300000>;

			regulator-max-microvolt = <3304000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l16b: ldo16 {

			regulator-name = "vreg_l16b";

			regulator-min-microvolt = <3008000>;

			regulator-max-microvolt = <3008000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l17b: ldo17 {

			regulator-name = "vreg_l17b";

			regulator-min-microvolt = <3104000>;

			regulator-max-microvolt = <3104000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l18b: ldo18 {

			regulator-name = "vreg_l18b";

			regulator-min-microvolt = <2800000>;

			regulator-max-microvolt = <2800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l19b: ldo19 {

			regulator-name = "vreg_l19b";

			regulator-min-microvolt = <3000000>;

			regulator-max-microvolt = <3000000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l20b: ldo20 {

			regulator-name = "vreg_l20b";

			regulator-min-microvolt = <1620000>;

			regulator-max-microvolt = <3544000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l21b: ldo21 {

			regulator-name = "vreg_l21b";

			regulator-min-microvolt = <1620000>;

			regulator-max-microvolt = <3544000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l22b: ldo22 {

			regulator-name = "vreg_l22b";

			regulator-min-microvolt = <3200000>;

			regulator-max-microvolt = <3200000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l23b: ldo23 {

			regulator-name = "vreg_l23b";

			regulator-min-microvolt = <1650000>;

			regulator-max-microvolt = <3544000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_bob: bob {

			regulator-name = "vreg_bob";

			regulator-min-microvolt = <3008000>;

			regulator-max-microvolt = <3960000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};

	};



	regulators-1 {

		compatible = "qcom,pm8550vs-rpmh-regulators";



		vdd-l1-supply = <&vreg_s3b>;

		vdd-l3-supply = <&vreg_s3b>;



		qcom,pmic-id = "c";



		vreg_l2c: ldo2 {

			regulator-name = "vreg_l2c";

			regulator-min-microvolt = <320000>;

			regulator-max-microvolt = <650000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};

	};



	regulators-2 {

		compatible = "qcom,pmr735b-rpmh-regulators";



		vdd-l1-l2-supply= <&vreg_s3b>;

		vdd-l3-supply= <&vreg_s3b>;

		vdd-l4-supply= <&vreg_s1b>;

		vdd-l5-supply= <&vreg_s2b>;

		vdd-l6-supply= <&vreg_s2b>;

		vdd-l7-l8-supply= <&vreg_s2b>;

		vdd-l9-supply= <&vreg_s3b>;

		vdd-l10-supply= <&vreg_s1b>;

		vdd-l11-supply= <&vreg_s3b>;

		vdd-l12-supply= <&vreg_s3b>;



		qcom,pmic-id = "f";



		vreg_l1f: ldo1 {

			regulator-name = "vreg_l1f";

			regulator-min-microvolt = <852000>;

			regulator-max-microvolt = <950000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l2f: ldo2 {

			regulator-name = "vreg_l2f";

			regulator-min-microvolt = <751000>;

			regulator-max-microvolt = <824000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l3f: ldo3 {

			regulator-name = "vreg_l3f";

			regulator-min-microvolt = <650000>;

			regulator-max-microvolt = <880000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l4f: ldo4 {

			regulator-name = "vreg_l4f";

			regulator-min-microvolt = <1700000>;

			regulator-max-microvolt = <1950000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l5f: ldo5 {

			regulator-name = "vreg_l5f";

			regulator-min-microvolt = <1140000>;

			regulator-max-microvolt = <1260000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l6f: ldo6 {

			regulator-name = "vreg_l6f";

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l7f: ldo7 {

			regulator-name = "vreg_l7f";

			regulator-min-microvolt = <1080000>;

			regulator-max-microvolt = <1350000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l8f: ldo8 {

			regulator-name = "vreg_l8f";

			regulator-min-microvolt = <1100000>;

			regulator-max-microvolt = <1320000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l9f: ldo9 {

			regulator-name = "vreg_l9f";

			regulator-min-microvolt = <870000>;

			regulator-max-microvolt = <970000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l10f: ldo10 {

			regulator-name = "vreg_l10f";

			regulator-min-microvolt = <1500000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l11f: ldo11 {

			regulator-name = "vreg_l11f";

			regulator-min-microvolt = <320000>;

			regulator-max-microvolt = <864000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};

	};

};



&gcc {

	protected-clocks = <GCC_PCIE_1_AUX_CLK>, <GCC_PCIE_1_AUX_CLK_SRC>,

			   <GCC_PCIE_1_CFG_AHB_CLK>, <GCC_PCIE_1_MSTR_AXI_CLK>,

			   <GCC_PCIE_1_PHY_RCHNG_CLK>, <GCC_PCIE_1_PHY_RCHNG_CLK_SRC>,

			   <GCC_PCIE_1_PIPE_CLK>, <GCC_PCIE_1_PIPE_CLK_SRC>,

			   <GCC_PCIE_1_PIPE_DIV2_CLK>, <GCC_PCIE_1_PIPE_DIV2_CLK_SRC>,

			   <GCC_PCIE_1_SLV_AXI_CLK>, <GCC_PCIE_1_SLV_Q2A_AXI_CLK>;

};



&i2c1 {

	/* Samsung NFC @ 0x27 */



	status = "okay";

};



&i2c3 {

	/* AW88261FCR amplifier (top) @ 0x34 */

	/* AW88261FCR amplifier (bottom) @ 0x35 */



	status = "okay";

};



&i2c7 {

	status = "okay";



	pm8008: pmic@8 {

		compatible = "qcom,pm8008";

		reg = <0x8>;



		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_RISING>;

		reset-gpios = <&pmr735b_gpios 3 GPIO_ACTIVE_LOW>;



		vdd-l1-l2-supply = <&vreg_s2b>;

		vdd-l3-l4-supply = <&vreg_bob>;

		vdd-l5-supply = <&vreg_bob>;

		vdd-l6-supply = <&vreg_s1b>;

		vdd-l7-supply = <&vreg_bob>;



		pinctrl-0 = <&pm8008_int_default>, <&pm8008_reset_n_default>;

		pinctrl-names = "default";



		gpio-controller;

		#gpio-cells = <2>;

		gpio-ranges = <&pm8008 0 0 2>;



		interrupt-controller;

		#interrupt-cells = <2>;



		#thermal-sensor-cells = <0>;



		regulators {

			vreg_l1p: ldo1 {

				regulator-name = "vreg_l1p";

				regulator-min-microvolt = <1000000>;

				regulator-max-microvolt = <1200000>;

			};



			vreg_l2p: ldo2 {

				regulator-name = "vreg_l2p";

				regulator-min-microvolt = <950000>;

				regulator-max-microvolt = <1144000>;

			};



			vreg_l3p: ldo3 {

				regulator-name = "vreg_l3p";

				regulator-min-microvolt = <2700000>;

				regulator-max-microvolt = <3000000>;

			};



			vreg_l4p: ldo4 {

				regulator-name = "vreg_l4p";

				regulator-min-microvolt = <2700000>;

				regulator-max-microvolt = <2900000>;

			};



			vreg_l5p: ldo5 {

				regulator-name = "vreg_l5p";

				regulator-min-microvolt = <2704000>;

				regulator-max-microvolt = <2900000>;

			};



			vreg_l6p: ldo6 {

				regulator-name = "vreg_l6p";

				regulator-min-microvolt = <1700000>;

				regulator-max-microvolt = <1896000>;

			};



			vreg_l7p: ldo7 {

				regulator-name = "vreg_l7p";

				regulator-min-microvolt = <2700000>;

				regulator-max-microvolt = <3400000>;

			};

		};

	};



	/* VL53L3 ToF @ 0x29 */

	/* AW86938FCR vibrator @ 0x5a */

};



&pm8550vs_c {

	status = "okay";

};



&pmiv0104_eusb2_repeater {

	vdd18-supply = <&vreg_l7b>;

	vdd3-supply = <&vreg_l17b>;



	qcom,tune-res-fsdif = /bits/ 8 <0x5>;

	qcom,tune-usb2-amplitude = /bits/ 8 <0x8>;

	qcom,tune-usb2-disc-thres = /bits/ 8 <0x7>;

	qcom,tune-usb2-preem = /bits/ 8 <0x6>;

};



&pmr735b_gpios {

	s1j_enable_default: s1j-enable-default-state {

		pins = "gpio1";

		function = PMIC_GPIO_FUNC_NORMAL;

		power-source = <0>;

		bias-disable;

		output-low;

	};



	pm8008_reset_n_default: pm8008-reset-n-default-state {

		pins = "gpio3";

		function = PMIC_GPIO_FUNC_NORMAL;

		bias-pull-down;

	};

};



&pm7550_gpios {

	volume_up_default: volume-up-default-state {

		pins = "gpio6";

		function = PMIC_GPIO_FUNC_NORMAL;

		power-source = <1>;

		bias-pull-up;

	};

};



&pm7550_flash {

	status = "okay";



	led-0 {

		function = LED_FUNCTION_FLASH;

		color = <LED_COLOR_ID_WHITE>;

		led-sources = <1>, <4>;

		led-max-microamp = <350000>;

		flash-max-microamp = <1500000>;

		flash-max-timeout-us = <400000>;

	};

};



&pon_pwrkey {

	status = "okay";

};



&pon_resin {

	linux,code = <KEY_VOLUMEDOWN>;



	status = "okay";

};



&qupv3_id_0 {

	status = "okay";

};



&qupv3_id_1 {

	status = "okay";

};



&remoteproc_adsp {

	firmware-name = "qcom/milos/fairphone/fp6/adsp.mbn",

			"qcom/milos/fairphone/fp6/adsp_dtb.mbn";



	status = "okay";

};



&remoteproc_cdsp {

	firmware-name = "qcom/milos/fairphone/fp6/cdsp.mbn",

			"qcom/milos/fairphone/fp6/cdsp_dtb.mbn";



	status = "okay";

};



&remoteproc_mpss {

	firmware-name = "qcom/milos/fairphone/fp6/modem.mbn";



	status = "okay";

};



&remoteproc_wpss {

	firmware-name = "qcom/milos/fairphone/fp6/wpss.mbn";



	status = "okay";

};



&sdhc_2 {

	cd-gpios = <&tlmm 65 GPIO_ACTIVE_HIGH>;



	vmmc-supply = <&vreg_l13b>;

	vqmmc-supply = <&vreg_l23b>;

	no-sdio;

	no-mmc;



	pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;

	pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;

	pinctrl-names = "default", "sleep";



	status = "okay";

};



&spi0 {

	/* Eswin EPH8621 touchscreen @ 0 */

};



&tlmm {

	gpio-reserved-ranges = <8 4>, /* Fingerprint SPI */

			       <13 1>, /* NC */

			       <63 2>; /* WLAN UART */



	sdc2_card_det_n: sdc2-card-det-state {

		pins = "gpio65";

		function = "gpio";

		drive-strength = <2>;

		bias-pull-up;

	};



	pm8008_int_default: pm8008-int-default-state {

		pins = "gpio125";

		function = "gpio";

		drive-strength = <2>;

		bias-disable;

	};

};



&uart5 {

	status = "okay";

};



&usb_1 {

	dr_mode = "otg";



	/* USB 2.0 only, HW does not support USB 3.x */

	qcom,select-utmi-as-pipe-clk;



	status = "okay";

};



&usb_1_dwc3_hs {

	remote-endpoint = <&pmic_glink_hs_in>;

};



&usb_1_hsphy {

	vdd-supply = <&vreg_l2b>;

	vdda12-supply = <&vreg_l4b>;



	phys = <&pmiv0104_eusb2_repeater>;



	status = "okay";

};