Commit f5b788d0 authored by Aleksandrs Vinarskis's avatar Aleksandrs Vinarskis Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345 

Initial support for Dell XPS 9345 13" 2024 (Codenamed 'Tributo') based
on X1E80100.

Working:
* Touchpad
* Keyboard (only post suspend&resume, i2c-hid patch required [1])
* Touchscreen
* eDP (low-res IPS, OLED) with brightness control
* NVME
* USB Type-C ports in USB2/USB3 (one orientation)
* WiFi
* GPU/aDSP/cDSP firmware loading (requires binaries from Windows)
* Lid switch
* Sleep/suspend, nothing visibly broken on resume

Not working:
* Speakers (WIP, pin guessing, x4 WSA8845)
* Microphones (WIP, pin guessing, dual array)
* Fingerprint Reader (WIP, USB MP with ptn3222)
* USB as DP/USB3 (WIP, PS8830 based)
* Camera (Likely OV01A10)
* EC over i2c

Should be working, but cannot be tested due to lack of hw:
* higher res IPS panel

[1] https://lore.kernel.org/all/20240925100303.9112-1-alex.vinarskis@gmail.com/



Signed-off-by: default avatarAleksandrs Vinarskis <alex.vinarskis@gmail.com>
Tested-by: default avatarStefan Schmidt <stefan.schmidt@linaro.org>
Link: https://lore.kernel.org/r/20241003211139.9296-4-alex.vinarskis@gmail.com


Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent 1aa50217

arch/arm64/boot/dts/qcom/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -272,6 +272,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb 
dtb-$(CONFIG_ARCH_QCOM)	+= x1e78100-lenovo-thinkpad-t14s.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-asus-vivobook-s15.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-crd.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-dell-xps13-9345.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-lenovo-yoga-slim7x.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-microsoft-romulus13.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-microsoft-romulus15.dtb

arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts

0 → 100644
+863 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: BSD-3-Clause

/*

 * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.

 * Copyright (c) 2024 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>

 */



/dts-v1/;



#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/gpio-keys.h>

#include <dt-bindings/input/input.h>

#include <dt-bindings/leds/common.h>

#include <dt-bindings/regulator/qcom,rpmh-regulator.h>



#include "x1e80100.dtsi"

#include "x1e80100-pmics.dtsi"



/ {

	model = "Dell XPS 13 9345";

	compatible = "dell,xps13-9345", "qcom,x1e80100";

	chassis-type = "laptop";



	aliases {

		serial0 = &uart21;

	};



	gpio-keys {

		compatible = "gpio-keys";



		pinctrl-0 = <&hall_int_n_default>;

		pinctrl-names = "default";



		switch-lid {

			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;

			linux,input-type = <EV_SW>;

			linux,code = <SW_LID>;

			wakeup-source;

			wakeup-event-action = <EV_ACT_DEASSERTED>;

		};

	};



	leds {

		compatible = "gpio-leds";



		pinctrl-names = "default";

		pinctrl-0 = <&cam_indicator_en>;



		led-camera-indicator {

			label = "white:camera-indicator";

			function = LED_FUNCTION_INDICATOR;

			color = <LED_COLOR_ID_WHITE>;

			gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "none";

			default-state = "off";

			/* Reuse as a panic indicator until we get a "camera on" trigger */

			panic-indicator;

		};

	};



	pmic-glink {

		compatible = "qcom,x1e80100-pmic-glink",

			     "qcom,sm8550-pmic-glink",

			     "qcom,pmic-glink";

		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,

				    <&tlmm 123 GPIO_ACTIVE_HIGH>;

		#address-cells = <1>;

		#size-cells = <0>;



		/* Right-side USB Type-C port */

		connector@0 {

			compatible = "usb-c-connector";

			reg = <0>;

			power-role = "dual";

			data-role = "dual";



			ports {

				#address-cells = <1>;

				#size-cells = <0>;



				port@0 {

					reg = <0>;



					pmic_glink_ss0_hs_in: endpoint {

						remote-endpoint = <&usb_1_ss0_dwc3_hs>;

					};

				};



				port@1 {

					reg = <1>;



					pmic_glink_ss0_ss_in: endpoint {

						remote-endpoint = <&usb_1_ss0_qmpphy_out>;

					};

				};

			};

		};



		/* Left-side USB Type-C port */

		connector@1 {

			compatible = "usb-c-connector";

			reg = <1>;

			power-role = "dual";

			data-role = "dual";



			ports {

				#address-cells = <1>;

				#size-cells = <0>;



				port@0 {

					reg = <0>;



					pmic_glink_ss1_hs_in: endpoint {

						remote-endpoint = <&usb_1_ss1_dwc3_hs>;

					};

				};



				port@1 {

					reg = <1>;



					pmic_glink_ss1_ss_in: endpoint {

						remote-endpoint = <&usb_1_ss1_qmpphy_out>;

					};

				};

			};

		};

	};



	reserved-memory {

		linux,cma {

			compatible = "shared-dma-pool";

			size = <0x0 0x8000000>;

			reusable;

			linux,cma-default;

		};

	};



	vreg_edp_3p3: regulator-edp-3p3 {

		compatible = "regulator-fixed";



		regulator-name = "VREG_EDP_3P3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;



		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;

		enable-active-high;



		pinctrl-0 = <&edp_reg_en>;

		pinctrl-names = "default";



		regulator-boot-on;

	};



	vreg_nvme: regulator-nvme {

		compatible = "regulator-fixed";



		regulator-name = "VREG_NVME_3P3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;



		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;

		enable-active-high;



		pinctrl-0 = <&nvme_reg_en>;

		pinctrl-names = "default";

	};



	vreg_vph_pwr: regulator-vph-pwr {

		compatible = "regulator-fixed";



		regulator-name = "vph_pwr";

		regulator-min-microvolt = <3700000>;

		regulator-max-microvolt = <3700000>;



		regulator-always-on;

		regulator-boot-on;

	};

};



&apps_rsc {

	regulators-0 {

		compatible = "qcom,pm8550-rpmh-regulators";

		qcom,pmic-id = "b";

		vdd-bob1-supply = <&vreg_vph_pwr>;

		vdd-bob2-supply = <&vreg_vph_pwr>;

		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;

		vdd-l2-l13-l14-supply = <&vreg_bob1>;

		vdd-l5-l16-supply = <&vreg_bob1>;

		vdd-l6-l7-supply = <&vreg_bob2>;

		vdd-l8-l9-supply = <&vreg_bob1>;

		vdd-l12-supply = <&vreg_s5j_1p2>;

		vdd-l15-supply = <&vreg_s4c_1p8>;

		vdd-l17-supply = <&vreg_bob2>;



		vreg_bob1: bob1 {

			regulator-name = "vreg_bob1";

			regulator-min-microvolt = <3008000>;

			regulator-max-microvolt = <3960000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_bob2: bob2 {

			regulator-name = "vreg_bob2";

			regulator-min-microvolt = <2504000>;

			regulator-max-microvolt = <3008000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l2b_3p0: ldo2 {

			regulator-name = "vreg_l2b_3p0";

			regulator-min-microvolt = <3072000>;

			regulator-max-microvolt = <3072000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l4b_1p8: ldo4 {

			regulator-name = "vreg_l4b_1p8";

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l6b_1p8: ldo6 {

			regulator-name = "vreg_l6b_1p8";

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <2960000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l8b_3p0: ldo8 {

			regulator-name = "vreg_l8b_3p0";

			regulator-min-microvolt = <3072000>;

			regulator-max-microvolt = <3072000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l9b_2p9: ldo9 {

			regulator-name = "vreg_l9b_2p9";

			regulator-min-microvolt = <2960000>;

			regulator-max-microvolt = <2960000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l12b_1p2: ldo12 {

			regulator-name = "vreg_l12b_1p2";

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l13b_3p0: ldo13 {

			regulator-name = "vreg_l13b_3p0";

			regulator-min-microvolt = <3072000>;

			regulator-max-microvolt = <3072000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l14b_3p0: ldo14 {

			regulator-name = "vreg_l14b_3p0";

			regulator-min-microvolt = <3072000>;

			regulator-max-microvolt = <3072000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l15b_1p8: ldo15 {

			regulator-name = "vreg_l15b_1p8";

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l17b_2p5: ldo17 {

			regulator-name = "vreg_l17b_2p5";

			regulator-min-microvolt = <2504000>;

			regulator-max-microvolt = <2504000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};

	};



	regulators-1 {

		compatible = "qcom,pm8550ve-rpmh-regulators";

		qcom,pmic-id = "c";

		vdd-l1-supply = <&vreg_s5j_1p2>;

		vdd-l2-supply = <&vreg_s1f_0p7>;

		vdd-l3-supply = <&vreg_s1f_0p7>;



		vreg_s4c_1p8: smps4 {

			regulator-name = "vreg_s4c_1p8";

			regulator-min-microvolt = <1856000>;

			regulator-max-microvolt = <2000000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l1c_1p2: ldo1 {

			regulator-name = "vreg_l1c_1p2";

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l2c_0p8: ldo2 {

			regulator-name = "vreg_l2c_0p8";

			regulator-min-microvolt = <880000>;

			regulator-max-microvolt = <880000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l3c_0p9: ldo3 {

			regulator-name = "vreg_l3c_0p9";

			regulator-min-microvolt = <920000>;

			regulator-max-microvolt = <920000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};

	};



	regulators-2 {

		compatible = "qcom,pmc8380-rpmh-regulators";

		qcom,pmic-id = "d";

		vdd-l1-supply = <&vreg_s1f_0p7>;

		vdd-l2-supply = <&vreg_s1f_0p7>;

		vdd-l3-supply = <&vreg_s4c_1p8>;

		vdd-s1-supply = <&vreg_vph_pwr>;



		vreg_l1d_0p8: ldo1 {

			regulator-name = "vreg_l1d_0p8";

			regulator-min-microvolt = <880000>;

			regulator-max-microvolt = <880000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l2d_0p9: ldo2 {

			regulator-name = "vreg_l2d_0p9";

			regulator-min-microvolt = <912000>;

			regulator-max-microvolt = <912000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l3d_1p8: ldo3 {

			regulator-name = "vreg_l3d_1p8";

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};

	};



	regulators-3 {

		compatible = "qcom,pmc8380-rpmh-regulators";

		qcom,pmic-id = "e";

		vdd-l2-supply = <&vreg_s1f_0p7>;

		vdd-l3-supply = <&vreg_s5j_1p2>;



		vreg_l2e_0p8: ldo2 {

			regulator-name = "vreg_l2e_0p8";

			regulator-min-microvolt = <880000>;

			regulator-max-microvolt = <880000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l3e_1p2: ldo3 {

			regulator-name = "vreg_l3e_1p2";

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};

	};



	regulators-4 {

		compatible = "qcom,pmc8380-rpmh-regulators";

		qcom,pmic-id = "f";

		vdd-l1-supply = <&vreg_s5j_1p2>;

		vdd-l2-supply = <&vreg_s5j_1p2>;

		vdd-l3-supply = <&vreg_s5j_1p2>;

		vdd-s1-supply = <&vreg_vph_pwr>;



		vreg_s1f_0p7: smps1 {

			regulator-name = "vreg_s1f_0p7";

			regulator-min-microvolt = <700000>;

			regulator-max-microvolt = <1100000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};

	};



	regulators-6 {

		compatible = "qcom,pm8550ve-rpmh-regulators";

		qcom,pmic-id = "i";

		vdd-l1-supply = <&vreg_s4c_1p8>;

		vdd-l2-supply = <&vreg_s5j_1p2>;

		vdd-l3-supply = <&vreg_s1f_0p7>;

		vdd-s1-supply = <&vreg_vph_pwr>;

		vdd-s2-supply = <&vreg_vph_pwr>;



		vreg_s1i_0p9: smps1 {

			regulator-name = "vreg_s1i_0p9";

			regulator-min-microvolt = <900000>;

			regulator-max-microvolt = <920000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_s2i_1p0: smps2 {

			regulator-name = "vreg_s2i_1p0";

			regulator-min-microvolt = <1000000>;

			regulator-max-microvolt = <1100000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l1i_1p8: ldo1 {

			regulator-name = "vreg_l1i_1p8";

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l2i_1p2: ldo2 {

			regulator-name = "vreg_l2i_1p2";

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l3i_0p8: ldo3 {

			regulator-name = "vreg_l3i_0p8";

			regulator-min-microvolt = <880000>;

			regulator-max-microvolt = <880000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};

	};



	regulators-7 {

		compatible = "qcom,pm8550ve-rpmh-regulators";

		qcom,pmic-id = "j";

		vdd-l1-supply = <&vreg_s1f_0p7>;

		vdd-l2-supply = <&vreg_s5j_1p2>;

		vdd-l3-supply = <&vreg_s1f_0p7>;

		vdd-s5-supply = <&vreg_vph_pwr>;



		vreg_s5j_1p2: smps5 {

			regulator-name = "vreg_s5j_1p2";

			regulator-min-microvolt = <1256000>;

			regulator-max-microvolt = <1304000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l1j_0p9: ldo1 {

			regulator-name = "vreg_l1j_0p9";

			regulator-min-microvolt = <912000>;

			regulator-max-microvolt = <912000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l2j_1p2: ldo2 {

			regulator-name = "vreg_l2j_1p2";

			regulator-min-microvolt = <1256000>;

			regulator-max-microvolt = <1256000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l3j_0p8: ldo3 {

			regulator-name = "vreg_l3j_0p8";

			regulator-min-microvolt = <880000>;

			regulator-max-microvolt = <880000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};

	};

};



&gpu {

	status = "okay";



	zap-shader {

		firmware-name = "qcom/x1e80100/dell/xps13-9345/qcdxkmsuc8380.mbn";

	};

};



&i2c0 {

	clock-frequency = <400000>;

	status = "okay";



	keyboard@5 {

		compatible = "hid-over-i2c";

		reg = <0x5>;



		hid-descr-addr = <0x20>;

		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;



		pinctrl-0 = <&kybd_default>;

		pinctrl-names = "default";



		wakeup-source;

	};

};



&i2c3 {

	clock-frequency = <400000>;

	status = "disabled";

	/* PS8830 Retimer @0x8 */

	/* Unknown device @0x9 */

};



&i2c5 {

	clock-frequency = <100000>;

	status = "disabled";

	/* EC @0x3b */

};



&i2c7 {

	clock-frequency = <400000>;

	status = "disabled";

	/* PS8830 Retimer @0x8 */

	/* Unknown device @0x9 */

};



&i2c8 {

	clock-frequency = <400000>;



	status = "okay";



	touchscreen@10 {

		compatible = "hid-over-i2c";

		reg = <0x10>;



		hid-descr-addr = <0x1>;

		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;



		pinctrl-0 = <&ts0_default>;

		pinctrl-names = "default";

	};

};



&i2c9 {

	clock-frequency = <400000>;

	status = "disabled";

	/* USB3 retimer device @0x4f */

};



&i2c17 {

	clock-frequency = <400000>;

	status = "okay";



	touchpad@2c {

		compatible = "hid-over-i2c";

		reg = <0x2c>;



		hid-descr-addr = <0x20>;

		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;



		pinctrl-0 = <&tpad_default>;

		pinctrl-names = "default";



		wakeup-source;

	};

};



&mdss {

	status = "okay";

};



&mdss_dp3 {

	/delete-property/ #sound-dai-cells;



	status = "okay";



	aux-bus {

		panel {

			/* 1920x1200 IPS panel is SHP1593, PNP09FF compatible */

			compatible = "edp-panel";

			power-supply = <&vreg_edp_3p3>;



			port {

				edp_panel_in: endpoint {

					remote-endpoint = <&mdss_dp3_out>;

				};

			};

		};

	};



	ports {

		port@1 {

			reg = <1>;



			mdss_dp3_out: endpoint {

				data-lanes = <0 1 2 3>;

				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;



				remote-endpoint = <&edp_panel_in>;

			};

		};

	};

};



&mdss_dp3_phy {

	vdda-phy-supply = <&vreg_l3j_0p8>;

	vdda-pll-supply = <&vreg_l2j_1p2>;



	status = "okay";

};



&pcie4 {

	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;

	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;



	pinctrl-0 = <&pcie4_default>;

	pinctrl-names = "default";



	status = "okay";

};



&pcie4_phy {

	vdda-phy-supply = <&vreg_l3i_0p8>;

	vdda-pll-supply = <&vreg_l3e_1p2>;



	status = "okay";

};



&pcie6a {

	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;

	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;



	vddpe-3v3-supply = <&vreg_nvme>;



	pinctrl-0 = <&pcie6a_default>;

	pinctrl-names = "default";



	status = "okay";

};



&pcie6a_phy {

	vdda-phy-supply = <&vreg_l1d_0p8>;

	vdda-pll-supply = <&vreg_l2j_1p2>;



	status = "okay";

};



&qupv3_0 {

	status = "okay";

};



&qupv3_1 {

	status = "okay";

};



&qupv3_2 {

	status = "okay";

};



&remoteproc_adsp {

	firmware-name = "qcom/x1e80100/dell/xps13-9345/qcadsp8380.mbn",

			"qcom/x1e80100/dell/xps13-9345/adsp_dtbs.elf";



	status = "okay";

};



&remoteproc_cdsp {

	firmware-name = "qcom/x1e80100/dell/xps13-9345/qccdsp8380.mbn",

			"qcom/x1e80100/dell/xps13-9345/cdsp_dtbs.elf";



	status = "okay";

};



&smb2360_0_eusb2_repeater {

	vdd18-supply = <&vreg_l3d_1p8>;

	vdd3-supply = <&vreg_l2b_3p0>;

};



&smb2360_1_eusb2_repeater {

	vdd18-supply = <&vreg_l3d_1p8>;

	vdd3-supply = <&vreg_l14b_3p0>;

};



&tlmm {

	gpio-reserved-ranges = <44 4>,  /* SPI11 (TPM) */

			       <76 4>,  /* SPI19 (TZ Protected) */

			       <238 1>; /* UFS Reset */



	cam_indicator_en: cam-indicator-en-state {

		pins = "gpio110";

		function = "gpio";

		drive-strength = <2>;

		bias-disable;

	};



	edp_reg_en: edp-reg-en-state {

		pins = "gpio70";

		function = "gpio";

		drive-strength = <16>;

		bias-disable;

	};



	hall_int_n_default: hall-int-n-state {

		pins = "gpio92";

		function = "gpio";



		bias-disable;

	};



	kybd_default: kybd-default-state {

		pins = "gpio67";

		function = "gpio";

		bias-pull-up;

	};



	nvme_reg_en: nvme-reg-en-state {

		pins = "gpio18";

		function = "gpio";

		drive-strength = <2>;

		bias-disable;

	};



	pcie4_default: pcie4-default-state {

		clkreq-n-pins {

			pins = "gpio147";

			function = "pcie4_clk";

			drive-strength = <2>;

			bias-pull-up;

		};



		perst-n-pins {

			pins = "gpio146";

			function = "gpio";

			drive-strength = <2>;

			bias-disable;

		};



		wake-n-pins {

			pins = "gpio148";

			function = "gpio";

			drive-strength = <2>;

			bias-pull-up;

		};

	};



	pcie6a_default: pcie6a-default-state {

		clkreq-n-pins {

			pins = "gpio153";

			function = "pcie6a_clk";

			drive-strength = <2>;

			bias-pull-up;

		};



		perst-n-pins {

			pins = "gpio152";

			function = "gpio";

			drive-strength = <2>;

			bias-disable;

		};



		wake-n-pins {

			pins = "gpio154";

			function = "gpio";

			drive-strength = <2>;

			bias-pull-up;

		};

	};



	tpad_default: tpad-default-state {

		disable-pins {

			pins = "gpio38";

			function = "gpio";

			output-high;

		};



		int-n-pins {

			pins = "gpio3";

			function = "gpio";

			bias-pull-up;

		};



		reset-n-pins {

			pins = "gpio52";

			function = "gpio";

			bias-disable;

		};

	};



	ts0_default: ts0-default-state {

		disable-pins {

			pins = "gpio75";

			function = "gpio";

			output-high;

		};



		int-n-pins {

			pins = "gpio51";

			function = "gpio";

			bias-pull-up;

		};



		reset-n-pins {

			/* Technically should be High-Z input */

			pins = "gpio48";

			function = "gpio";

			output-low;

			drive-strength = <2>;

		};

	};

};



&uart21 {

	compatible = "qcom,geni-debug-uart";

	status = "okay";

};



&usb_1_ss0_hsphy {

	vdd-supply = <&vreg_l3j_0p8>;

	vdda12-supply = <&vreg_l2j_1p2>;



	phys = <&smb2360_0_eusb2_repeater>;



	status = "okay";

};



&usb_1_ss0_qmpphy {

	vdda-phy-supply = <&vreg_l3e_1p2>;

	vdda-pll-supply = <&vreg_l1j_0p9>;



	status = "okay";

};



&usb_1_ss0 {

	status = "okay";

};



&usb_1_ss0_dwc3 {

	dr_mode = "host";

};



&usb_1_ss0_dwc3_hs {

	remote-endpoint = <&pmic_glink_ss0_hs_in>;

};



&usb_1_ss0_qmpphy_out {

	remote-endpoint = <&pmic_glink_ss0_ss_in>;

};



&usb_1_ss1_hsphy {

	vdd-supply = <&vreg_l3j_0p8>;

	vdda12-supply = <&vreg_l2j_1p2>;



	phys = <&smb2360_1_eusb2_repeater>;



	status = "okay";

};



&usb_1_ss1_qmpphy {

	vdda-phy-supply = <&vreg_l3e_1p2>;

	vdda-pll-supply = <&vreg_l2d_0p9>;



	status = "okay";

};



&usb_1_ss1 {

	status = "okay";

};



&usb_1_ss1_dwc3 {

	dr_mode = "host";

};



&usb_1_ss1_dwc3_hs {

	remote-endpoint = <&pmic_glink_ss1_hs_in>;

};



&usb_1_ss1_qmpphy_out {

	remote-endpoint = <&pmic_glink_ss1_ss_in>;

};