Till now, the runtime PM workqueue has been flagged as freezable, so it
does not process work items during system-wide PM transitions like
system suspend and resume. The original reason to do that was to
reduce the likelihood of runtime PM getting in the way of system-wide
PM processing, but now it is mostly an optimization because (1) runtime
suspend of devices is prevented by bumping up their runtime PM usage
counters in device_prepare() and (2) device drivers are expected to
disable runtime PM for the devices handled by them before they embark
on system-wide PM activities that may change the state of the hardware
or otherwise interfere with runtime PM. However, it prevents
asynchronous runtime resume of devices from working during system-wide
PM transitions, which is confusing because synchronous runtime resume
is not prevented at the same time, and it also sometimes turns out to
be problematic.
For example, it has been reported that blk_queue_enter() may deadlock
during a system suspend transition because of the pm_request_resume()
usage in it [1]. It may also deadlock during a system resume transition
in a similar way. That happens because the asynchronous runtime resume
of the given device is not processed due to the freezing of the runtime
PM workqueue. While it may be better to address this particular issue
in the block layer, the very presence of it means that similar problems
may be expected to occur elsewhere.
For this reason, remove the WQ_FREEZABLE flag from the runtime PM
workqueue and make device_suspend_late() use the generic variant of
pm_runtime_disable() that will carry out runtime PM of the device
synchronously if there is pending resume work for it.
Also update the comment before the pm_runtime_disable() call in
device_suspend_late(), to document the fact that the runtime PM
should not be expected to work for the device until the end of
device_resume_early(), and update the related documentation.
This change may, even though it is not expected to, uncover some
latent issues related to queuing up asynchronous runtime resume
work items during system suspend or hibernation. However, they
should be limited to the interference between runtime resume and
system-wide PM callbacks in the cases when device drivers start
to handle system-wide PM before disabling runtime PM as described
above.
Link: https://lore.kernel.org/linux-pm/20251126101636.205505-2-yang.yang@vivo.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12794222.O9o76ZdvQC@rafael.j.wysocki
The '7. Generic subsystem callbacks' should be a section title, but
the markdown syntax is not adequate now.
Fix it so the chapter can be linked at docs.kernel.org correctly.
Signed-off-by: Yiwei Lin <s921975628@gmail.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add __pm_runtime_put_autosuspend() that replaces
pm_runtime_put_autosuspend() for new users. The intent is to later
re-purpose pm_runtime_put_autosuspend() to also mark the device's last
busy stamp---which is what the vast majority of users actually need.
This is also described in pm_runtime_put_autosuspend() documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are two ways to opportunistically increment a device's runtime PM
usage count, calling either pm_runtime_get_if_active() or
pm_runtime_get_if_in_use(). The former has an argument to tell whether to
ignore the usage count or not, and the latter simply calls the former with
ign_usage_count set to false. The other users that want to ignore the
usage_count will have to explicitly set that argument to true which is a
bit cumbersome.
To make this function more practical to use, remove the ign_usage_count
argument from the function. The main implementation is in a static
function called pm_runtime_get_conditional() and implementations of
pm_runtime_get_if_active() and pm_runtime_get_if_in_use() are moved to
runtime.c.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Takashi Iwai <tiwai@suse.de> # sound/
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> # drivers/accel/ivpu/
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> # drivers/gpu/drm/i915/
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In some cases (for example, during system-wide suspend and resume of
devices) it is useful to know whether or not runtime PM has ever been
enabled for a given device and, if so, what the runtime PM status of
it had been right before runtime PM was disabled for it last time.
For this reason, introduce a new struct dev_pm_info field called
last_status that will be used for capturing the runtime PM status of
the device when its power.disable_depth counter changes from 0 to 1.
The new field will be set to RPM_INVALID to start with and whenever
power.disable_depth changes from 1 to 0, so it will be valid only
when runtime PM of the device is currently disabled, but it has been
enabled at least once.
Immediately use power.last_status in rpm_resume() to make it handle
the case when PM runtime is disabled for the device, but its runtime
PM status is RPM_ACTIVE more consistently. Namely, make it return 1
if power.last_status is also equal to RPM_ACTIVE in that case (the
idea being that if the status was RPM_ACTIVE last time when
power.disable_depth was changing from 0 to 1 and it is still
RPM_ACTIVE, it can be assumed to reflect what happened to the device
last time when it was using runtime PM) and -EACCES otherwise.
Update the documentation to provide a description of last_status and
change the description of pm_runtime_resume() in it to reflect the
new behavior of rpm_active().
While at it, rearrange the code in pm_runtime_enable() to be more
straightforward and replace the WARN() macro in it with a pr_warn()
invocation which is less disruptive.
Link: https://lore.kernel.org/linux-pm/20211026222626.39222-1-ulf.hansson@linaro.org/t/#u
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Recent changes to the PM core allows ->runtime_suspend|resume callbacks to
be unassigned.
In the earlier behaviour the PM core would return -ENOSYS, when trying to
runtime resume a device, for example. Let's update the documentation to
clarify this.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
pm_runtime_get_sync(), contradictory to intuition, does not drop the
runtime PM usage counter on errors which lead to several wrong usages in
drivers (missing the put). pm_runtime_resume_and_get() was added as a
better implementation so document the preference of using it, hoping it
will stop bad patterns.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
[ rjw: Documentation change edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to
deal with usage counter") added a new runtime-PM API function without
updating the documentation in runtime_pm.rst.
Add the missing documentation.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
pm_runtime_get_if_in_use() bumps up the PM-runtime usage count if it
is not equal to zero and the device's PM-runtime status is 'active'.
This works for drivers that do not use autoidle, but for those that
do, the function returns zero even when the device is active.
In order to maintain sane device state while the device is powered on
in the hope that it'll be needed, pm_runtime_get_if_active(dev, true)
returns a positive value if the device's PM-runtime status is 'active'
when it is called, in which case it also increments the device's usage
count.
If the second argument of pm_runtime_get_if_active() is 'false', the
function behaves just like pm_runtime_get_if_in_use(), so redefine
the latter as a wrapper around the former.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Wrap to 80 columns. No textual change except to correct some "it's" that
should be "its".
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Convert the PM documents to ReST, in order to allow them to
build with Sphinx.
The conversion is actually:
- add blank lines and indentation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
