In fact, these two are not tied closely to each other. The only
requirements to GRO are to use it in the BH context and have some
sane limits on the packet batches, e.g. NAPI has a limit of its
budget (64/8/etc.).
Move purely GRO fields into a new structure, &gro_node. Embed it
into &napi_struct and adjust all the references.
gro_node::cached_napi_id is effectively the same as
napi_struct::napi_id, but to be used on GRO hotpath to mark skbs.
napi_struct::napi_id is now a fully control path field.
Three Ethernet drivers use napi_gro_flush() not really meant to be
exported, so move it to <net/gro.h> and add that include there.
napi_gro_receive() is used in more than 100 drivers, keep it
in <linux/netdevice.h>.
This does not make GRO ready to use outside of the NAPI context
yet.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A common task for most drivers is to remember the user-set CPU affinity
to its IRQs. On each netdev reset, the driver should re-assign the user's
settings to the IRQs. Unify this task across all drivers by moving the CPU
affinity to napi->config.
However, to move the CPU affinity to core, we also need to move aRFS
rmap management since aRFS uses its own IRQ notifiers.
For the aRFS, add a new netdev flag "rx_cpu_rmap_auto". Drivers supporting
aRFS should set the flag via netif_enable_cpu_rmap() and core will allocate
and manage the aRFS rmaps. Freeing the rmap is also done by core when the
netdev is freed. For better IRQ affinity management, move the IRQ rmap
notifier inside the napi_struct and add new notify.notify and
notify.release functions: netif_irq_cpu_rmap_notify() and
netif_napi_affinity_release().
Now we have the aRFS rmap management in core, add CPU affinity mask to
napi_config. To delegate the CPU affinity management to the core, drivers
must:
1 - set the new netdev flag "irq_affinity_auto":
netif_enable_irq_affinity(netdev)
2 - create the napi with persistent config:
netif_napi_add_config()
3 - bind an IRQ to the napi instance: netif_napi_set_irq()
the core will then make sure to use re-assign affinity to the napi's
IRQ.
The default IRQ mask is set to one cpu starting from the closest NUMA.
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the previous commit is finally safe to revert commit dbae2b0628
("net: skb: introduce and use a single page frag cache"): do it here.
The intended goal of such change was to counter a performance regression
introduced by commit 3226b158e6 ("net: avoid 32 x truesize
under-estimation for tiny skbs").
Unfortunately, the blamed commit introduces another regression for the
virtio_net driver. Such a driver calls napi_alloc_skb() with a tiny
size, so that the whole head frag could fit a 512-byte block.
The single page frag cache uses a 1K fragment for such allocation, and
the additional overhead, under small UDP packets flood, makes the page
allocator a bottleneck.
Thanks to commit bf9f1baa27 ("net: add dedicated kmem_cache for
typical/small skb->head"), this revert does not re-introduce the
original regression. Actually, in the relevant test on top of this
revert, I measure a small but noticeable positive delta, just above
noise level.
The revert itself required some additional mangling due to recent updates
in the affected code.
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: dbae2b0628 ("net: skb: introduce and use a single page frag cache")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit dbae2b0628 ("net: skb: introduce and use a single
page frag cache"). The intended goal of such change was to counter a
performance regression introduced by commit 3226b158e6 ("net: avoid
32 x truesize under-estimation for tiny skbs").
Unfortunately, the blamed commit introduces another regression for the
virtio_net driver. Such a driver calls napi_alloc_skb() with a tiny
size, so that the whole head frag could fit a 512-byte block.
The single page frag cache uses a 1K fragment for such allocation, and
the additional overhead, under small UDP packets flood, makes the page
allocator a bottleneck.
Thanks to commit bf9f1baa27 ("net: add dedicated kmem_cache for
typical/small skb->head"), this revert does not re-introduce the
original regression. Actually, in the relevant test on top of this
revert, I measure a small but noticeable positive delta, just above
noise level.
The revert itself required some additional mangling due to the
introduction of the SKB_HEAD_ALIGN() helper and local lock infra in the
affected code.
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: dbae2b0628 ("net: skb: introduce and use a single page frag cache")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/e649212fde9f0fdee23909ca0d14158d32bb7425.1738877290.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rx/tx queues embed their own kobject for registering their per-queue
sysfs files. The issue is they're using the kobject default groups for
this and entirely rely on the kobject refcounting for releasing their
sysfs paths.
In order to remove rtnl_trylock calls we need sysfs files not to rely on
their associated kobject refcounting for their release. Thus we here
move queues sysfs files from the kobject default groups to their own
groups which can be removed separately.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-3-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the blamed commits below, some UDP tunnel use dstats for
accounting. On the xmit path, all the UDP-base tunnels ends up
using iptunnel_xmit_stats() for stats accounting, and the latter
assumes the relevant (tunnel) network device uses tstats.
The end result is some 'funny' stat report for the mentioned UDP
tunnel, e.g. when no packet is actually dropped and a bunch of
packets are transmitted:
gnv2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue \
state UNKNOWN mode DEFAULT group default qlen 1000
link/ether ee:7d:09:87:90:ea brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
14916 23 0 15 0 0
TX: bytes packets errors dropped carrier collsns
0 1566 0 0 0 0
Address the issue ensuring the same binary layout for the overlapping
fields of dstats and tstats. While this solution is a bit hackish, is
smaller and with no performance pitfall compared to other alternatives
i.e. supporting both dstat and tstat in iptunnel_xmit_stats() or
reverting the blamed commit.
With time we should possibly move all the IP-based tunnel (and virtual
devices) to dstats.
Fixes: c77200c074 ("bareudp: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Fixes: 6fa6de3022 ("geneve: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Fixes: be226352e8 ("vxlan: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/2e1c444cf0f63ae472baff29862c4c869be17031.1738432804.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Protect the following members of netdev and napi by netdev_lock:
- defer_hard_irqs,
- gro_flush_timeout,
- irq_suspend_timeout.
The first two are written via sysfs (which this patch switches
to new lock), and netdev genl which holds both netdev and rtnl locks.
irq_suspend_timeout is only written by netdev genl.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that NAPI instances can't come and go without holding
netdev->lock we can trivially switch from rtnl_lock() to
netdev_lock() for setting netdev->threaded via sysfs.
Note that since we do not lock netdev_lock around sysfs
calls in the core we don't have to "trylock" like we do
with rtnl_lock.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wrap napi_enable() / napi_disable() with netdev_lock().
Provide the "already locked" flavor of the API.
iavf needs the usual adjustment. A number of drivers call
napi_enable() under a spin lock, so they have to be modified
to take netdev_lock() first, then spin lock then call
napi_enable_locked().
Protecting napi_enable() implies that napi->napi_id is protected
by netdev_lock().
Acked-by: Francois Romieu <romieu@fr.zoreil.com> # via-velocity
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hold netdev->lock when NAPIs are getting added or removed.
This will allow safe access to NAPI instances of a net_device
without rtnl_lock.
Create a family of helpers which assume the lock is already taken.
Switch iavf to them, as it makes extensive use of netdev->lock,
already.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some uAPI (netdev netlink) hide net_device's sub-objects while
the interface is down to ensure uniform behavior across drivers.
To remove the rtnl_lock dependency from those uAPIs we need a way
to safely tell if the device is down or up.
Add an indication of whether device is open or closed, protected
by netdev->lock. The semantics are the same as IFF_UP, but taking
netdev_lock around every write to ->flags would be a lot of code
churn.
We don't want to blanket the entire open / close path by netdev_lock,
because it will prevent us from applying it to specific structures -
core helpers won't be able to take that lock from any function
called by the drivers on open/close paths.
So the state of the flag is "pessimistic", as in it may report false
negatives, but never false positives.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Protect writes to netdev->reg_state with netdev_lock().
From now on holding netdev_lock() is sufficient to prevent
the net_device from getting unregistered, so code which
wants to hold just a single netdev around no longer needs
to hold rtnl_lock.
We do not protect the NETREG_UNREGISTERED -> NETREG_RELEASED
transition. We'd need to move mutex_destroy(netdev->lock)
to .release, but the real reason is that trying to stop
the unregistration process mid-way would be unsafe / crazy.
Taking references on such devices is not safe, either.
So the intended semantics are to lock REGISTERED devices.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When tcp-data-split is UNKNOWN mode, drivers arbitrarily handle it.
For example, bnxt_en driver automatically enables if at least one of
LRO/GRO/JUMBO is enabled.
If tcp-data-split is UNKNOWN and LRO is enabled, a driver returns
ENABLES of tcp-data-split, not UNKNOWN.
So, `ethtool -g eth0` shows tcp-data-split is enabled.
The problem is in the setting situation.
In the ethnl_set_rings(), it first calls get_ringparam() to get the
current driver's config.
At that moment, if driver's tcp-data-split config is UNKNOWN, it returns
ENABLE if LRO/GRO/JUMBO is enabled.
Then, it sets values from the user and driver's current config to
kernel_ethtool_ringparam.
Last it calls .set_ringparam().
The driver, especially bnxt_en driver receives
ETHTOOL_TCP_DATA_SPLIT_ENABLED.
But it can't distinguish whether it is set by the user or just the
current config.
When user updates ring parameter, the new hds_config value is updated
and current hds_config value is stored to old_hdsconfig.
Driver's .set_ringparam() callback can distinguish a passed
tcp-data-split value is came from user explicitly.
If .set_ringparam() is failed, hds_config is rollbacked immediately.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250114142852.3364986-2-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add multicast filtering support for VLAN interfaces in dual EMAC mode
for ICSSG driver.
The driver uses vlan_for_each() API to get the list of available
vlans. The driver then sync mc addr of vlan interface with a locally
mainatined list emac->vlan_mcast_list[vid] using __hw_addr_sync_multiple()
API.
__hw_addr_sync_multiple() is used instead of __hw_addr_sync() to sync
vdev->mc with local list because the sync_cnt for addresses in vdev->mc
will already be set by the vlan_dev_set_rx_mode() [net/8021q/vlan_dev.c]
and __hw_addr_sync() only syncs when the sync_cnt == 0. Whereas
__hw_addr_sync_multiple() can sync addresses even if sync_cnt is not 0.
Export __hw_addr_sync_multiple() so that driver can use it.
Once the local list is synced, driver calls __hw_addr_sync_dev() with
the local list, vdev, sync and unsync callbacks.
__hw_addr_sync_dev() is used with the local maintained list as the list
to synchronize instead of using __dev_mc_sync() on vdev because
__dev_mc_sync() on vdev will call __hw_addr_sync_dev() on vdev->mc and
sync_cnt for addresses in vdev->mc will already be set by the
vlan_dev_set_rx_mode() [net/8021q/vlan_dev.c] and __hw_addr_sync_dev()
only syncs if the sync_cnt of addresses in the list (vdev->mc in this case)
is 0. Whereas __hw_addr_sync_dev() on local list will work fine as the
sync_cnt for addresses in the local list will still be 0.
Based on change in addresses in the local list, sync / unsync callbacks
are invoked. In the sync / unsync API in driver, based on whether the ndev
is vlan or not, driver passes appropriate vid to FDB helper functions.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
init_dummy_netdev() can initialize statically declared or embedded
net_devices. Such netdevs did not come from alloc_netdev_mqs().
After recent work by Breno, there are the only two cases where
we have do that.
Switch those cases to alloc_netdev_mqs() and delete init_dummy_netdev().
Dealing with static netdevs is not worth the maintenance burden.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250113003456.3904110-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit d7811e623d ("[NET]: Drop tx lock in dev_watchdog_up")
dev_watchdog_up() became a simple wrapper for __netdev_watchdog_up()
Herbert also said : "In 2.6.19 we can eliminate the unnecessary
__dev_watchdog_up and replace it with dev_watchdog_up."
This patch consolidates things to have only two functions, with
a common prefix.
- netdev_watchdog_up(), exported for the sake of one freescale driver.
This replaces __netdev_watchdog_up() and dev_watchdog_up().
- netdev_watchdog_down(), static to net/sched/sch_generic.c
This replaces dev_watchdog_down().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250105090924.1661822-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce the description of a hwtstamp provider, mainly defined with a
the hwtstamp source and the phydev pointer.
Add a hwtstamp provider description within the netdev structure to
allow saving the hwtstamp we want to use. This prepares for future
support of an ethtool netlink command to select the desired hwtstamp
provider. By default, the old API that does not support hwtstamp
selectability is used, meaning the hwtstamp provider pointer is unset.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently vrf is the only module that uses NETDEV_PCPU_STAT_DSTATS.
In order to make this kind of statistics available to other modules,
we need to define the update functions in netdevice.h.
Therefore, let's define dev_dstats_*() functions for RX and TX packet
updates (packets, bytes and drops). Use these new functions in vrf.c
instead of vrf_rx_stats() and the other manual counter updates.
While there, update the type of the "len" variables to "unsigned int",
so that there're aligned with both skb->len and the new dstats update
functions.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/d7a552ee382c79f4854e7fcc224cf176cd21150d.1733313925.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To make the system page pool usable as a source for allocating XDP
frames, we need to register it with xdp_reg_mem_model(), so that page
return works correctly. This is done in preparation for using the system
page_pool to convert XDP_PASS XSk frames to skbs; for the same reason,
make the per-cpu variable non-static so we can access it from other
source files as well (but w/o exporting).
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241203173733.3181246-7-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In lots of places, bpf_prog pointer is used only for tracing or other
stuff that doesn't modify the structure itself. Same for net_device.
Address at least some of them and add `const` attributes there. The
object code didn't change, but that may prevent unwanted data
modifications and also allow more helpers to have const arguments.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently when FDB entries are added to or deleted from a VXLAN netdevice,
the VXLAN driver emits one notification, including the VXLAN-specific
attributes. The core however always sends a notification as well, a generic
one. Thus two notifications are unnecessarily sent for these operations. A
similar situation comes up with bridge driver, which also emits
notifications on its own:
# ip link add name vx type vxlan id 1000 dstport 4789
# bridge monitor fdb &
[1] 1981693
# bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1
de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent
de:ad:be:ef:13:37 dev vx self permanent
In order to prevent this duplicity, add a paremeter to ndo_fdb_add,
bool *notified. The flag is primed to false, and if the callee sends a
notification on its own, it sets it to true, thus informing the core that
it should not generate another notification.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/cbf6ae8195e85cbf922f8058ce4eba770f3b71ed.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo says:
====================
wireless-next patches for v6.13
The first -next "new features" pull request for v6.13. This is a big
one as we have not been able to send one earlier. We have also some
patches affecting other subsystems: in staging we deleted the rtl8192e
driver and in debugfs added a new interface to save struct
file_operations memory; both were acked by GregKH.
Because of the lib80211/libipw move there were quite a lot of
conflicts and to solve those we decided to merge net-next into
wireless-next.
Major changes:
cfg80211/mac80211
* stop exporting wext symbols
* new mac80211 op to indicate that a new interface is to be added
* support radio separation of multi-band devices
Wireless Extensions
* move wext spy implementation to libiw
* remove iw_public_data from struct net_device
brcmfmac
* optional LPO clock support
ipw2x00
* move remaining lib80211 code into libiw
wilc1000
* WILC3000 support
rtw89
* RTL8852BE and RTL8852BE-VT BT-coexistence improvements
* tag 'wireless-next-2024-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (126 commits)
mac80211: Remove NOP call to ieee80211_hw_config
wifi: iwlwifi: work around -Wenum-compare-conditional warning
wifi: mac80211: re-order assigning channel in activate links
wifi: mac80211: convert debugfs files to short fops
debugfs: add small file operations for most files
wifi: mac80211: remove misleading j_0 construction parts
wifi: mac80211_hwsim: use hrtimer_active()
wifi: mac80211: refactor BW limitation check for CSA parsing
wifi: mac80211: filter on monitor interfaces based on configured channel
wifi: mac80211: refactor ieee80211_rx_monitor
wifi: mac80211: add support for the monitor SKIP_TX flag
wifi: cfg80211: add monitor SKIP_TX flag
wifi: mac80211: add flag to opt out of virtual monitor support
wifi: cfg80211: pass net_device to .set_monitor_channel
wifi: mac80211: remove status->ampdu_delimiter_crc
wifi: cfg80211: report per wiphy radio antenna mask
wifi: mac80211: use vif radio mask to limit creating chanctx
wifi: mac80211: use vif radio mask to limit ibss scan frequencies
wifi: cfg80211: add option for vif allowed radios
wifi: iwlwifi: allow IWL_FW_CHECK() with just a string
...
====================
Link: https://patch.msgid.link/20241025170705.5F6B2C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some workloads hit the infamous dev_watchdog() message:
"NETDEV WATCHDOG: eth0 (xxxx): transmit queue XX timed out"
It seems possible to hit this even for perfectly normal
BQL enabled drivers:
1) Assume a TX queue was idle for more than dev->watchdog_timeo
(5 seconds unless changed by the driver)
2) Assume a big packet is sent, exceeding current BQL limit.
3) Driver ndo_start_xmit() puts the packet in TX ring,
and netdev_tx_sent_queue() is called.
4) QUEUE_STATE_STACK_XOFF could be set from netdev_tx_sent_queue()
before txq->trans_start has been written.
5) txq->trans_start is written later, from netdev_start_xmit()
if (rc == NETDEV_TX_OK)
txq_trans_update(txq)
dev_watchdog() running on another cpu could read the old
txq->trans_start, and then see QUEUE_STATE_STACK_XOFF, because 5)
did not happen yet.
To solve the issue, write txq->trans_start right before one XOFF bit
is set :
- _QUEUE_STATE_DRV_XOFF from netif_tx_stop_queue()
- __QUEUE_STATE_STACK_XOFF from netdev_tx_sent_queue()
From dev_watchdog(), we have to read txq->state before txq->trans_start.
Add memory barriers to enforce correct ordering.
In the future, we could avoid writing over txq->trans_start for normal
operations, and rename this field to txq->xoff_start_time.
Fixes: bec251bc8b ("net: no longer stop all TX queues in dev_watchdog()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241015194118.3951657-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a persistent NAPI config area for NAPI configuration to the core.
Drivers opt-in to setting the persistent config for a NAPI by passing an
index when calling netif_napi_add_config.
napi_config is allocated in alloc_netdev_mqs, freed in free_netdev
(after the NAPIs are deleted).
Drivers which call netif_napi_add_config will have persistent per-NAPI
settings: NAPI IDs, gro_flush_timeout, and defer_hard_irq settings.
Per-NAPI settings are saved in napi_disable and restored in napi_enable.
Co-developed-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241011184527.16393-6-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow per-NAPI gro_flush_timeout setting.
The existing sysfs parameter is respected; writes to sysfs will write to
all NAPI structs for the device and the net_device gro_flush_timeout
field. Reads from sysfs will read from the net_device field.
The ability to set gro_flush_timeout on specific NAPI instances will be
added in a later commit, via netdev-genl.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-4-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add defer_hard_irqs to napi_struct in preparation for per-NAPI
settings.
The existing sysfs parameter is respected; writes to sysfs will write to
all NAPI structs for the device and the net_device defer_hard_irq field.
Reads from sysfs show the net_device field.
The ability to set defer_hard_irqs on specific NAPI instances will be
added in a later commit, via netdev-genl.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-2-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce the basic infrastructure to implement the net-shaper
core functionality. Each network devices carries a net-shaper cache,
the NL get() operation fetches the data from such cache.
The cache is initially empty, will be fill by the set()/group()
operation implemented later and is destroyed at device cleanup time.
The net_shaper_fill_handle(), net_shaper_ctx_init(), and
net_shaper_generic_pre() implementations handle generic index type
attributes, despite the current caller always pass a constant value
to avoid more noise in later patches using them with different
attributes.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/ddd10fd645a9367803ad02fca4a5664ea5ace170.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the conflicts to happen, resolving
them in the process.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
