ISP mfd child devices are using genpd and the system suspend-resume
operations between genpd and amdgpu parent device which uses only
runtime suspend-resume are not in sync.
Linux power manager during suspend-resume resuming the genpd devices
earlier than the amdgpu parent device. This is resulting in the below
warning as SMU is in suspended state when genpd attempts to resume ISP.
WARNING: CPU: 13 PID: 5435 at drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:398 smu_dpm_set_power_gate+0x36f/0x380 [amdgpu]
To fix this warning isp suspend-resume is handled as part of amdgpu
parent device suspend-resume instead of genpd sequence. Each ISP MFD
child device is marked as dev_pm_syscore_device to skip genpd
suspend-resume and use pm_runtime_force api's to suspend-resume
the devices when callbacks from amdgpu are received.
Co-developed-by: Gjorgji Rosikopulos <grosikop@amd.com>
Signed-off-by: Gjorgji Rosikopulos <grosikop@amd.com>
Signed-off-by: Bin Du <bin.du@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0288a345f1)
Create amd_isp_capture MFD device with swnode initialized to
isp specific software_node part of fwnode graph in amd_isp4
x86/platform driver. The isp driver use this swnode handle
to retrieve the critical properties (data-lanes, mipi phyid,
link-frequencies etc.) required for camera to work on AMD ISP4
based targets.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AMDISP I2C device requires to power on ISP HW to probe the sensor
device. Instead of using the exported symbols from ISP driver to
control the power and clocks remotely,added Generic PM Domain (genpd)
support in amdgpu_isp device for its child devices (amd_isp_capture,
amd_isp_i2c_designware) to set power and clocks using PM methods.
Co-developed-by: Bin Du <bin.du@amd.com>
Signed-off-by: Bin Du <bin.du@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ISP is a child device to GFX, and its device specific information
is not available in ACPI. Adding the 2 GPIO resources required for
ISP_v4_1_1 in amdgpu_isp driver.
- GPIO 0 to allow sensor driver to enable and disable sensor module.
- GPIO 85 to allow ISP driver to enable and disable ISP RGB streaming mode.
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ISP I2C bus device can't be enumerated via ACPI mechanism
since it shares the memory map with the AMDGPU.
So use the MFD mechanism for registering the ISP I2C device
and add the required resources.
Signed-off-by: Venkata Narendra Kumar Gutta <vengutta@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove temporary WA to disable ISP prefetch as MMHUB SAW is initialized
to support ISP HW access GART memory using the TLSi path with prefetch
enabled.
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable MMHUB prefetch for ISP v4.1.1 as a temporary WA until
the GART supports MMHUB TLSi and SAW for ISP HW to access
GART memory using the TLSi path.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
