Files
linux-nf/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2007.yaml
Fabio Estevam c1b52451b6 dt-bindings: input: touchscreen: tsc2007: Document 'wakeup-source'
The 'wakeup-source' property is used by many devicetree files and is
also supported by the tsc2007_core driver.

Document it to avoid the following dt-schema warning:

'wakeup-source' does not match any of the regexes: '^pinctrl-[0-9]+$'

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250822213245.125901-1-festevam@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-09-03 06:57:56 -07:00

78 lines
1.7 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2007.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments tsc2007 touchscreen controller
maintainers:
- Frank Li <Frank.Li@nxp.com>
properties:
compatible:
const: ti,tsc2007
reg:
maxItems: 1
interrupts:
maxItems: 1
ti,x-plate-ohms:
description: X-plate resistance in ohms.
gpios: true
pendown-gpio: true
wakeup-source: true
ti,max-rt:
$ref: /schemas/types.yaml#/definitions/uint32
description: maximum pressure.
ti,fuzzx:
$ref: /schemas/types.yaml#/definitions/uint32
description:
specifies the absolute input fuzz x value.
If set, it will permit noise in the data up to +- the value given to the fuzz
parameter, that is used to filter noise from the event stream.
ti,fuzzy:
$ref: /schemas/types.yaml#/definitions/uint32
description: specifies the absolute input fuzz y value.
ti,fuzzz:
$ref: /schemas/types.yaml#/definitions/uint32
description: specifies the absolute input fuzz z value.
ti,poll-period:
$ref: /schemas/types.yaml#/definitions/uint32
description:
how much time to wait (in milliseconds) before reading again the
values from the tsc2007.
required:
- compatible
- reg
- ti,x-plate-ohms
additionalProperties: false
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
touch@49 {
compatible = "ti,tsc2007";
reg = <0x49>;
interrupt-parent = <&gpio4>;
interrupts = <0x0 0x8>;
gpios = <&gpio4 0 0>;
ti,x-plate-ohms = <180>;
};
};