openrisc: dts: Add de0 nano config and devicetree

The de0 nano from Terasic is an FPGA board that we use in the OpenRISC
community to test OpenRISC configurations.  Add a base configuration for
the board that runs an OpenRISC CPU at 50Mhz with 32MB ram, UART for
console and some GPIOs for LEDs and switches.

There is an older version of this floating around that defines all of
the hardware on the board including SPI's, flash devices, sram, ADCs
etc.  Eventually it would be good to get the full version upstream
but for now I think a minimal board is good to start with.

Link: https://openrisc.io/tutorials/de0_nano/
Link: https://github.com/olofk/de0_nano

Signed-off-by: Stafford Horne <shorne@gmail.com>

arch/openrisc/boot/dts/de0-nano-common.dtsi

@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds0: leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+			label = "heartbeat";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	/* 8 Green LEDs */
+	gpio0: gpio@91000000 {
+		compatible = "opencores,gpio";
+		reg = <0x91000000 0x1>, <0x91000001 0x1>;
+		reg-names = "dat", "dirout";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	/* 4 DIP Switches */
+	gpio1: gpio@92000000 {
+		compatible = "opencores,gpio";
+		reg = <0x92000000 0x1>, <0x92000001 0x1>;
+		reg-names = "dat", "dirout";
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "disabled";
+	};
+};

arch/openrisc/boot/dts/de0-nano.dts

@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "de0-nano-common.dtsi"
+
+/ {
+	model = "Terasic DE0 Nano";
+	compatible = "opencores,or1ksim";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&pic>;
+
+	aliases {
+		uart0 = &serial0;
+	};
+
+	chosen {
+		stdout-path = "uart0:115200";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "opencores,or1200-rtlsvn481";
+			reg = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	/*
+	 * OR1K PIC is built into CPU and accessed via special purpose
+	 * registers.  It is not addressable and, hence, has no 'reg'
+	 * property.
+	 */
+	pic: pic {
+		compatible = "opencores,or1k-pic";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	serial0: serial@90000000 {
+		compatible = "opencores,uart16550-rtlsvn105", "ns16550a";
+		reg = <0x90000000 0x100>;
+		interrupts = <2>;
+		clock-frequency = <50000000>;
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};

arch/openrisc/configs/de0_nano_defconfig

@@ -0,0 +1,79 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+# CONFIG_RD_ZSTD is not set
+CONFIG_EXPERT=y
+# CONFIG_EPOLL is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_BUILTIN_DTB_NAME="de0-nano"
+# CONFIG_FPU is not set
+CONFIG_HZ_100=y
+# CONFIG_BLOCK is not set
+CONFIG_SLUB_TINY=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_INET_UDP_DIAG=y
+CONFIG_INET_RAW_DIAG=y
+CONFIG_INET_DIAG_DESTROY=y
+# CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_PPS=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_GPIO_SYSFS_LEGACY is not set
+CONFIG_GPIO_GENERIC_PLATFORM=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_ACTIVITY=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_LEDS_TRIGGER_PANIC=y
+CONFIG_LEDS_TRIGGER_NETDEV=y
+CONFIG_LEDS_TRIGGER_PATTERN=y
+CONFIG_LEDS_TRIGGER_TTY=y
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_VHOST_MENU is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+# CONFIG_XZ_DEC_ARM64 is not set
+# CONFIG_XZ_DEC_SPARC is not set
+# CONFIG_XZ_DEC_RISCV is not set
+CONFIG_PRINTK_TIME=y
+# CONFIG_DEBUG_MISC is not set
+# CONFIG_FTRACE is not set
+# CONFIG_RUNTIME_TESTING_MENU is not set