Anti-Rollback (ARB) is a QAT GEN6 hardware feature that prevents loading
firmware with a Security Version Number (SVN) lower than an authorized
minimum. This protects against downgrade attacks by ensuring that only
firmware at or above a committed SVN can run on the acceleration device.
During firmware loading, the driver checks the SVN validation status via
a hardware CSR. If the check reports a failure, firmware authentication
is aborted. If it reports a retry status, the driver reissues the
authentication command up to a maximum number of retries.
Extend the firmware admin interface with two new messages,
ICP_QAT_FW_SVN_READ and ICP_QAT_FW_SVN_COMMIT, to query and commit the
SVN, respectively. Integrate the SVN check into the firmware
authentication path in qat_uclo.c so the driver can react to
anti-rollback status during device bring-up.
Expose SVN information to userspace via a new sysfs attribute group,
qat_svn, under the PCI device directory. The group provides read-only
attributes for the active, enforced minimum, and permanent minimum SVN
values, as well as a write-only commit attribute that allows a system
administrator to commit the currently active SVN as the new authorized
minimum.
This is based on earlier work by Ciunas Bennett.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use print_hex_dump_devel() for dumping sensitive HMAC key bytes in
hash_digest_key() to avoid leaking secrets at runtime when
CONFIG_DYNAMIC_DEBUG is enabled.
Fixes: 045e36780f ("crypto: caam - ahash hmac support")
Fixes: 3f16f6c9d6 ("crypto: caam/qi2 - add support for ahash algorithms")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the __counted_by() compiler attribute to the flexible array member
'group' to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace memset() followed by memcpy() with memcpy_and_pad() to simplify
the code and to write to 'cache' only once.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace multiple for loops with calls to crypto_unregister_ahashes() and
crypto_unregister_skciphers().
If crypto_register_skcipher() fails in s5p_aes_probe(), log the error
directly instead of checking 'i < ARRAY_SIZE(algs)' later. Also drop
now-unused local index variables. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document the anonymous SKCIPHER_ALG_COMMON and COMP_ALG_COMMON struct
members in skcipher_alg, scomp_alg, and acomp_alg, following the
existing pattern used by HASH_ALG_COMMON in shash_alg.
This fixes the following kernel-doc warnings:
include/crypto/skcipher.h:166: struct member 'SKCIPHER_ALG_COMMON' not described in 'skcipher_alg'
include/crypto/internal/scompress.h:39: struct member 'COMP_ALG_COMMON' not described in 'scomp_alg'
include/crypto/internal/acompress.h:55: struct member 'COMP_ALG_COMMON' not described in 'acomp_alg'
Signed-off-by: Kit Dallege <xaum.io@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the skcipher algorithm support from crypto/simd.c. It is no
longer used, and it is unlikely to gain any new user in the future,
given the performance issues with this code.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Unregister the hwrng to prevent new ->read() calls and flush the Atmel
I2C workqueue before teardown to prevent a potential UAF if a queued
callback runs while the device is being removed.
Drop the early return to ensure sysfs entries are removed and
->hwrng.priv is freed, preventing a memory leak.
Fixes: da001fb651 ("crypto: atmel-i2c - add support for SHA204A random number generator")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
syzbot reported the following warning:
DEAD callback error for CPU1
WARNING: kernel/cpu.c:1463 at _cpu_down+0x759/0x1020 kernel/cpu.c:1463, CPU#0: syz.0.1960/14614
at commit 4ae12d8bd9a8 ("Merge tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux")
which tglx traced to padata_cpu_dead() given it's the only
sub-CPUHP_TEARDOWN_CPU callback that returns an error.
Failure isn't allowed in hotplug states before CPUHP_TEARDOWN_CPU
so move the CPU offline callback to the ONLINE section where failure is
possible.
Fixes: 894c9ef978 ("padata: validate cpumask without removed CPU during offline")
Reported-by: syzbot+123e1b70473ce213f3af@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69af0a05.050a0220.310d8.002f.GAE@google.com/
Debugged-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The accelerator device supports usage statistics. This patch enables
obtaining the accelerator's usage through the "dev_usage" file.
The returned number expressed as a percentage as a percentage.
Signed-off-by: Zongyu Wu <wuzongyu1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Mark internal fields as "private:" so that kernel-doc comments
are not needed for them, eliminating kernel-doc warnings:
Warning: include/linux/hw_random.h:54 struct member 'list' not described
in 'hwrng'
Warning: include/linux/hw_random.h:54 struct member 'ref' not described
in 'hwrng'
Warning: include/linux/hw_random.h:54 struct member 'cleanup_work' not
described in 'hwrng'
Warning: include/linux/hw_random.h:54 struct member 'cleanup_done' not
described in 'hwrng'
Warning: include/linux/hw_random.h:54 struct member 'dying' not described
in 'hwrng'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the scomp conversion, nx842_crypto_alloc_ctx() allocates the
context separately, but nx842_crypto_free_ctx() never releases it. Add
the missing kfree(ctx) to nx842_crypto_free_ctx(), and reuse
nx842_crypto_free_ctx() in the allocation error path.
Fixes: 980b5705f4 ("crypto: nx - Migrate to scomp API")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The bounce buffers are allocated with __get_free_pages() using
BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error
path and nx842_crypto_free_ctx() release the buffers with free_page().
Use free_pages() with the matching order instead.
Fixes: ed70b479c2 ("crypto: nx - add hardware 842 crypto comp alg")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ensure the device supports XTS and GCM with 'has_xts' and 'has_gcm'
before unregistering algorithms when XTS or authenc registration fails,
which would trigger a WARN in crypto_unregister_alg().
Currently, with the capabilities defined in atmel_aes_get_cap(), this
bug cannot happen because all devices that support XTS and authenc also
support GCM, but the error handling should still be correct regardless
of hardware capabilities.
Fixes: d52db5188a ("crypto: atmel-aes - add support to the XTS mode")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add wireless mode support for QAT GEN6 devices.
When the WCP_WAT fuse bit is clear, the device operates in wireless
cipher mode (wcy_mode). In this mode all accelerator engines load the
wireless firmware and service configuration via 'cfg_services' sysfs
attribute is restricted to 'sym' only.
The get_accel_cap() function is extended to report wireless-specific
capabilities (ZUC, ZUC-256, 5G, extended algorithm chaining) gated by
their respective slice-disable fuse bits. The set_ssm_wdtimer() function
is updated to configure WCP (wireless cipher) and WAT (wireless
authentication) watchdog timers. The adf_gen6_cfg_dev_init() function is
updated to use adf_6xxx_is_wcy() to enforce sym-only service selection
for WCY devices during initialization.
Co-developed-by: Aviraj Cj <aviraj.cj@intel.com>
Signed-off-by: Aviraj Cj <aviraj.cj@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
atmel_aes_buff_init() allocates 4 pages using __get_free_pages() with
ATMEL_AES_BUFFER_ORDER, but atmel_aes_buff_cleanup() frees only the
first page using free_page(), leaking the remaining 3 pages. Use
free_pages() with ATMEL_AES_BUFFER_ORDER to fix the memory leak.
Fixes: bbe628ed89 ("crypto: atmel-aes - improve performances of data transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Softirqs must be disabled when calling the finalization fucntion on
a request.
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use memcpy_and_pad() instead of memcpy() followed by memset() to
simplify artpec6_crypto_prepare_hash().
Also fix a duplicate word in a comment and remove a now-redundant one.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
krb5enc_encrypt_ahash_done() continues encryption from an ahash
completion callback by calling krb5enc_dispatch_encrypt().
That helper takes a flags argument for this continuation path, but it
ignored that argument and reused aead_request_flags(req) when setting
up the skcipher subrequest callback. This can incorrectly preserve
CRYPTO_TFM_REQ_MAY_SLEEP when the encrypt step is started from callback
context.
Preserve the original request flags but clear
CRYPTO_TFM_REQ_MAY_SLEEP for the callback continuation path, and use
the caller-supplied flags when setting up the skcipher subrequest.
Fixes: d1775a177f ("crypto: Add 'krb5enc' hash and cipher AEAD algorithm")
Assisted-by: Codex:GPT-5
Signed-off-by: Wesley Atwell <atwellwea@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
simd_register_skciphers_compat() and simd_register_aeads_compat()
derive the wrapper algorithm names by stripping the __ prefix from the
internal algorithm names.
Currently they only WARN if cra_name or cra_driver_name lacks that prefix,
but they still continue and unconditionally add 2 to both strings. That
registers wrapper algorithms with incorrectly truncated names after a
violated precondition.
Reject such inputs with -EINVAL before registering anything, while keeping
the warning so invalid internal API usage is still visible.
Fixes: d14f0a1fc4 ("crypto: simd - allow registering multiple algorithms at once")
Fixes: 1661131a04 ("crypto: simd - support wrapping AEAD algorithms")
Assisted-by: Codex:GPT-5
Signed-off-by: Wesley Atwell <atwellwea@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use list_first_entry_or_null() to simplify atmel_sha_find_dev() and
remove the now-unused local variable 'struct atmel_sha_dev *tmp'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before DMA output is consumed by the CPU, ->dma_addr_out must be synced
with dma_sync_single_for_cpu() instead of dma_sync_single_for_device().
Using the wrong direction can return stale cache data on non-coherent
platforms.
Fixes: 13802005d8 ("crypto: atmel - add Atmel DES/TDES driver")
Fixes: 1f858040c2 ("crypto: atmel-tdes - add support for latest release of the IP (0x700)")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register hash before hmac and authenc algorithms. This will ensure
selftests pass at startup. Previously, selftests failed on the
crypto_alloc_ahash() function since the associated algorithm was
not yet registered.
Fixes following error:
...
[ 18.375811] alg: self-tests for authenc(hmac(sha1),cbc(aes)) using authenc(hmac(sha1-eip93),cbc(aes-eip93)) failed (rc=-2)
[ 18.382140] alg: self-tests for authenc(hmac(sha224),rfc3686(ctr(aes))) using authenc(hmac(sha224-eip93),rfc3686(ctr(aes-eip93))) failed (rc=-2)
[ 18.395029] alg: aead: authenc(hmac(sha256-eip93),cbc(des-eip93)) setkey failed on test vector 0; expected_error=0, actual_error=-2, flags=0x1
[ 18.409734] alg: aead: authenc(hmac(md5-eip93),cbc(des3_ede-eip93)) setkey failed on test vector 0; expected_error=0, actual_error=-2, flags=0x1
...
Fixes: 9739f5f93b ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Lore shows no emails from Neil on linux-crypto since 2020. Without the
listed person being active, this MAINTAINERS entry provides no value,
and actually is a bit confusing because while it is called the
"CRYPTOGRAPHIC RANDOM NUMBER GENERATOR", it is not the CRNG that is
normally used (drivers/char/random.c) which has a separate entry.
Remove this entry, so crypto/rng.c will just be covered by "CRYPTO API".
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Test vectors were generated starting from existing RFC3686(CTR(AES)) test
vectors and adding HMAC(SHA512) computed with software implementation.
Then, the results were double-checked on Mediatek MT7986 (safexcel).
Platform pass self-tests.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Test vectors were generated starting from existing RFC3686(CTR(AES)) test
vectors and adding HMAC(SHA384) computed with software implementation.
Then, the results were double-checked on Mediatek MT7986 (safexcel).
Platform pass self-tests.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Test vectors were generated starting from existing RFC3686(CTR(AES)) test
vectors and adding HMAC(SHA256) computed with software implementation.
Then, the results were double-checked on Mediatek MT7986 (safexcel).
Platform pass self-tests.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Test vectors were generated starting from existing RFC3686(CTR(AES)) test
vectors and adding HMAC(SHA224) computed with software implementation.
Then, the results were double-checked on Mediatek MT7986 (safexcel).
Platform pass self-tests.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Test vectors were generated starting from existing RFC3686(CTR(AES)) test
vectors and adding HMAC(SHA1) computed with software implementation.
Then, the results were double-checked on Mediatek MT7986 (safexcel).
Platform pass self-tests.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QAT GEN6 hardware requires a minimum 3 us delay during the acceleration
engine reset sequence to ensure the hardware fully settles.
Without this delay, the firmware load may fail intermittently.
Add a delay after placing the AE into reset and before clearing the reset,
matching the hardware requirements and ensuring stable firmware loading.
Earlier generations remain unaffected.
Fixes: 17fd7514ae ("crypto: qat - add qat_6xxx driver")
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The macros in qat_hal.c were using a mixture of tabs and spaces.
Update all macro indentation to use tabs consistently, matching the
predominant style.
This does not introduce any functional change.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The async hash speed path ignores the return code from
crypto_ahash_setkey(). If the caller picks an unsupported key length,
the transform keeps whatever key state it already has and the speed test
still runs, producing misleading numbers, hence bail out of the loop when
setkey fails.
Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Passing num_mb=0 to the multibuffer speed tests leaves test_mb_aead_cycles()
and test_mb_acipher_cycles() dividing by (8 * num_mb). With sec=0 (the
default), the module prints "1 operation in ..." and hits a divide-by-zero
fault.
Force num_mb to at least 1 during module init and warn the caller so the
warm-up loop and the final report stay well-defined.
To reproduce:
sudo modprobe tcrypt mode=600 num_mb=0
Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sev_do_cmd() has its own command buffer (sev->cmd_buf) with the correct
alignment, perms, etc. that it copies the command into, so prepending it to
the firmware data is unnecessary.
Switch sev_update_firmware() to using a stack allocated command in light of
this copy, and drop all of the resulting pointer math.
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In qce_aead_done(), the return variable 'ret' is no longer used - remove
it. And qce_aead_prepare_dst_buf() jumps directly to 'dst_tbl_free:' on
error and returns 'sg' - drop the useless 'ret' assignments.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return sysfs_emit() directly and drop 'ret' in cap_rem_show().
In cap_rem_store(), use 'ret' when calling set_param_u() instead of
assigning it to 'val' first, and remove 'val'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to archive.org the site threw HTTP errors 404 since early 2024.
The last snapshot in the archive having actual content was from late 2023.
The page behind the new URL has more or less the same content as the
archived page from 2023, so it probably was just moved without setting
up a redirect.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for CTR mode of operation for AES algorithm in the AES
Engine of the DTHEv2 hardware cryptographic engine.
Signed-off-by: T Pratham <t-pratham@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During the CPU offline process, the dying CPU is cleared from the
cpu_online_mask in takedown_cpu(). After this step, various CPUHP_*_DEAD
callbacks are executed to perform cleanup jobs for the dead CPU, so this
cpu online check in padata_cpu_dead() is unnecessary.
Similarly, when executing padata_cpu_online() during the
CPUHP_AP_ONLINE_DYN phase, the CPU has already been set in the
cpu_online_mask, the action even occurs earlier than the
CPUHP_AP_ONLINE_IDLE stage.
Remove this unnecessary cpu online check in __padata_add_cpu() and
__padata_remove_cpu().
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix all kernel-doc warnings in ecc.h:
- use correct kernel-doc format
- add some Returns: sections
- fix spelling and parameter names
Fixes these warnings:
Warning: include/crypto/internal/ecc.h:82 function parameter 'nbytes' not
described in 'ecc_digits_from_bytes'
Warning: include/crypto/internal/ecc.h:82 function parameter 'out' not
described in 'ecc_digits_from_bytes'
Warning: include/crypto/internal/ecc.h:95 No description found for return
value of 'ecc_is_key_valid'
Warning: include/crypto/internal/ecc.h:110 No description found for return
value of 'ecc_gen_privkey'
Warning: include/crypto/internal/ecc.h:124 No description found for return
value of 'ecc_make_pub_key'
Warning: include/crypto/internal/ecc.h:143 No description found for return
value of 'crypto_ecdh_shared_secret'
Warning: include/crypto/internal/ecc.h:182 No description found for return
value of 'vli_is_zero'
Warning: include/crypto/internal/ecc.h:194 No description found for return
value of 'vli_cmp'
Warning: include/crypto/internal/ecc.h:209 function parameter 'right' not
described in 'vli_sub'
Warning: include/crypto/internal/ecc.h:271 expecting prototype for
ecc_aloc_point(). Prototype was for ecc_alloc_point() instead
Warning: include/crypto/internal/ecc.h:287 function parameter 'point' not
described in 'ecc_point_is_zero'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use correct function parameter names and add Returns: sections to
eliminate all kernel-doc warnings in des.h:
Warning: include/crypto/des.h:41 function parameter 'keylen' not
described in 'des_expand_key'
Warning: include/crypto/des.h:41 No description found for return value
of 'des_expand_key'
Warning: include/crypto/des.h:54 function parameter 'keylen' not
described in 'des3_ede_expand_key'
Warning: include/crypto/des.h:54 No description found for return value
of 'des3_ede_expand_key'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Correct kernel-doc:
- add the @extra function parameter
- add "_extra" to the mismatched function name
- spell the "cmpl" parameter correctly
to avoid these warnings:
Warning: include/crypto/acompress.h:251 function parameter 'extra' not
described in 'acomp_request_alloc_extra'
Warning: include/crypto/acompress.h:251 expecting prototype for
acomp_request_alloc(). Prototype was for acomp_request_alloc_extra()
instead
Warning: include/crypto/acompress.h:327 function parameter 'cmpl' not
described in 'acomp_request_set_callback'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
