Commit 2c62f908 authored by Oleksij Rempel's avatar Oleksij Rempel Committed by Shawn Guo
Browse files

ARM: dts: add Plymovent BAS board 



Plymovent BAS is a base system controller produced for the Plymovent filter
systems.

Co-Developed-by: default avatarDavid Jander <david@protonic.nl>
Signed-off-by: default avatarDavid Jander <david@protonic.nl>
Signed-off-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 8c906de4

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -465,6 +465,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ 
	imx6dl-pico-hobbit.dtb \

	imx6dl-pico-nymph.dtb \

	imx6dl-pico-pi.dtb \

	imx6dl-plybas.dtb \

	imx6dl-plym2m.dtb \

	imx6dl-prtrvt.dtb \

	imx6dl-prtvt7.dtb \

arch/arm/boot/dts/imx6dl-plybas.dts

0 → 100644
+394 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

/*

 * Copyright (c) 2014 Protonic Holland

 * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix

 */



/dts-v1/;

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/leds/common.h>

#include "imx6dl.dtsi"



/ {

	model = "Plymovent BAS board";

	compatible = "ply,plybas", "fsl,imx6dl";



	chosen {

		stdout-path = &uart4;

	};



	gpio_keys {

		compatible = "gpio-keys";

		#address-cells = <1>;

		#size-cells = <0>;

		autorepeat;



		button@20 {

			label = "START";

			linux,code = <31>;

			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;

		};



		button@21 {

			label = "CLEAN";

			linux,code = <46>;

			gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;

		};

	};



	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_leds>;



		led-0 {

			label = "debug0";

			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;

		};



		led-1 {

			label = "debug1";

			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;

		};



		led-2 {

			label = "light_tower1";

			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "heartbeat";

		};



		led-3 {

			label = "light_tower2";

			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;

		};



		led-4 {

			label = "light_tower3";

			gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;

		};



		led-5 {

			label = "light_tower4";

			gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;

		};

	};



	clk50m_phy: phy-clock {

		compatible = "fixed-clock";

		#clock-cells = <0>;

		clock-frequency = <50000000>;

	};



	reg_5v0: regulator-5v0 {

		compatible = "regulator-fixed";

		regulator-name = "5v0";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

	};

};



&can1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_can1>;

	xceiver-supply = <&reg_5v0>;

	status = "okay";

};



&can2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_can2>;

	xceiver-supply = <&reg_5v0>;

	status = "okay";

};



&ecspi1 {

	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_ecspi1>;

	status = "okay";



	flash@0 {

		compatible = "jedec,spi-nor";

		reg = <0>;

		spi-max-frequency = <20000000>;

	};

};



&fec {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_enet>;

	phy-mode = "rmii";

	clocks = <&clks IMX6QDL_CLK_ENET>,

		 <&clks IMX6QDL_CLK_ENET>,

		 <&clk50m_phy>;

	clock-names = "ipg", "ahb", "ptp";

	phy-handle = <&rgmii_phy>;

	status = "okay";



	mdio {

		#address-cells = <1>;

		#size-cells = <0>;



		/* Microchip KSZ8081RNA PHY */

		rgmii_phy: ethernet-phy@0 {

			reg = <0>;

			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;

			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;

			reset-assert-us = <10000>;

			reset-deassert-us = <300>;

		};

	};

};



&gpio1 {

	gpio-line-names =

		"", "SD1_CD", "", "", "", "", "", "",

		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "";

};



&gpio3 {

	gpio-line-names =

		"", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "", "ECSPI1_SS1", "", "USB_EXT_PWR", "", "",

		"", "", "", "", "", "", "", "";

};



&gpio4 {

	gpio-line-names =

		"", "", "", "", "", "", "", "",

		"", "", "", "", "CAN1_SR", "CAN2_SR", "", "",

		"LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "IMX6_IN12", "IMX6_HMI",

			"IMX6_IN11", "IMX6_BUZZER", "IMX6_LED1", "IMX6_LED2",

		"IMX6_LED3", "IMX6_LED4", "ETH_RESET", "IMX6_ANA_OUT_SD",

			"IMX6_ANA_OUT_ERR", "IMX6_ANA_OUT", "ETH_INTRP", "";

};



&gpio5 {

	gpio-line-names =

		"", "", "", "", "", "IMX6_RELAY1", "IMX6_RELAY2", "",

		"IMX6_IN1", "IMX6_IN2", "IMX6_IN3", "IMX6_IN4", "IMX6_IN5",

			"IMX6_IN6", "IMX6_IN7", "IMX6_IN8",

		"IMX6_IN9", "IMX6_IN10", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "";

};



&i2c1 {

	clock-frequency = <100000>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_i2c1>;

	status = "okay";



	/* additional i2c devices are added automatically by the boot loader */

};



&i2c3 {

	clock-frequency = <100000>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_i2c3>;

	status = "okay";



	temperature-sensor@70 {

		compatible = "ti,tmp103";

		reg = <0x70>;

	};



	rtc@51 {

		compatible = "nxp,pcf8563";

		reg = <0x51>;

	};

};



&pwm1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_pwm1>;

	status = "okay";

};



&uart1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart1>;

	status = "okay";

};



&uart2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart2>;

	fsl,uart-has-rtscts;

	linux,rs485-enabled-at-boot-time;

	rs485-rts-delay = <0 20>;

	status = "okay";

};



&uart4 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart4>;

	status = "okay";

};



&usbotg {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usbotg>;

	phy_type = "utmi";

	dr_mode = "host";

	disable-over-current;

	status = "okay";

};



&usbphynop1 {

	status = "disabled";

};



&usbphynop2 {

	status = "disabled";

};



&iomuxc {

	pinctrl_can1: can1grp {

		fsl,pins = <

			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000

			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008

			/* CAN1_SR */

			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008

		>;

	};



	pinctrl_can2: can2grp {

		fsl,pins = <

			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000

			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008

			/* CAN2_SR */

			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13008

		>;

	};



	pinctrl_ecspi1: ecspi1grp {

		fsl,pins = <

			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x1b000

			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x3008

			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x3008

			/* CS */

			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x3008

		>;

	};



	pinctrl_enet: enetgrp {

		fsl,pins = <

			/* MX6QDL_ENET_PINGRP4 */

			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0

			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0

			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0

			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0

			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0

			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0

			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0

			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0

			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0



			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0

			/* Phy reset */

			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0

			/* nINTRP */

			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0

		>;

	};



	pinctrl_i2c1: i2c1grp {

		fsl,pins = <

			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1

			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1

		>;

	};



	pinctrl_i2c3: i2c3grp {

		fsl,pins = <

			MX6QDL_PAD_GPIO_5__I2C3_SCL			0x4001b8b1

			MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1

		>;

	};



	pinctrl_leds: ledsgrp {

		fsl,pins = <

			/* DEBUG_0 */

			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x1b0b0

			/* DEBUG_1 */

			MX6QDL_PAD_GPIO_9__GPIO1_IO09			0x1b0b0



			/* LED1 (lighttower) */

			MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22		0x13070

			/* LED2 (lighttower) */

			MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23		0x13070

			/* LED3 (lighttower) */

			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24		0x13070

			/* LED4 (lighttower) */

			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25		0x13070

		>;

	};



	pinctrl_pwm1: pwm1grp {

		fsl,pins = <

			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x1b0b0

		>;

	};



	/* YaCO AUX Uart */

	pinctrl_uart1: uart1grp {

		fsl,pins = <

			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1

			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1

		>;

	};



	pinctrl_uart2: uart2grp {

		fsl,pins = <

			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1

			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1

			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B		0x130b1

		>;

	};



	pinctrl_uart4: uart4grp {

		fsl,pins = <

			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1

			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1

		>;

	};



	pinctrl_usbotg: usbotggrp {

		fsl,pins = <

			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0

			/* power enable, high active */

			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0

		>;

	};



	pinctrl_usdhc1: usdhc1grp {

		fsl,pins = <

			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9

			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9

			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9

			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9

			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9

			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9

			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0

		>;

	};



	pinctrl_usdhc3: usdhc3grp {

		fsl,pins = <

			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099

			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099

			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099

			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099

			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099

			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099

			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099

			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099

			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099

			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099

			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1

		>;

	};

};