Commit 6121f69c authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Pull SoC fixes from Arnd Bergmann:
 "These are two fixes that came in late, one addresses a regression on a
  rockchips based board, the other is for ensuring a consistent dt
  binding for a device added in 6.16 before the incorrect one makes it
  into a release"

* tag 'soc-fixes-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: rockchip: Drop netdev led-triggers on NanoPi R5S
  arm64: dts: allwinner: a523: Rename emac0 to gmac0
parents 5f33ebd2 912b1f2a
Loading
Loading
Loading
Loading
+3 −3
Original line number Diff line number Diff line
@@ -131,7 +131,7 @@ rgmii0_pins: rgmii0-pins {
				       "PH5", "PH6", "PH7", "PH9", "PH10",
				       "PH14", "PH15", "PH16", "PH17", "PH18";
				allwinner,pinmux = <5>;
				function = "emac0";
				function = "gmac0";
				drive-strength = <40>;
				bias-disable;
			};
@@ -540,8 +540,8 @@ ohci1: usb@4200400 {
			status = "disabled";
		};

		emac0: ethernet@4500000 {
			compatible = "allwinner,sun55i-a523-emac0",
		gmac0: ethernet@4500000 {
			compatible = "allwinner,sun55i-a523-gmac0",
				     "allwinner,sun50i-a64-emac";
			reg = <0x04500000 0x10000>;
			clocks = <&ccu CLK_BUS_EMAC0>;
+2 −2
Original line number Diff line number Diff line
@@ -12,7 +12,7 @@ / {
	compatible = "radxa,cubie-a5e", "allwinner,sun55i-a527";

	aliases {
		ethernet0 = &emac0;
		ethernet0 = &gmac0;
		serial0 = &uart0;
	};

@@ -55,7 +55,7 @@ &ehci1 {
	status = "okay";
};

&emac0 {
&gmac0 {
	phy-mode = "rgmii-id";
	phy-handle = <&ext_rgmii_phy>;
	phy-supply = <&reg_cldo3>;
+2 −2
Original line number Diff line number Diff line
@@ -12,7 +12,7 @@ / {
	compatible = "yuzukihd,avaota-a1", "allwinner,sun55i-t527";

	aliases {
		ethernet0 = &emac0;
		ethernet0 = &gmac0;
		serial0 = &uart0;
	};

@@ -65,7 +65,7 @@ &ehci1 {
	status = "okay";
};

&emac0 {
&gmac0 {
	phy-mode = "rgmii-id";
	phy-handle = <&ext_rgmii_phy>;
	phy-supply = <&reg_dcdc4>;
+0 −3
Original line number Diff line number Diff line
@@ -29,7 +29,6 @@ led-lan1 {
			function-enumerator = <1>;
			gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
			label = "LAN-1";
			linux,default-trigger = "netdev";
		};

		led-lan2 {
@@ -39,7 +38,6 @@ led-lan2 {
			function-enumerator = <2>;
			gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
			label = "LAN-2";
			linux,default-trigger = "netdev";
		};

		power_led: led-sys {
@@ -56,7 +54,6 @@ led-wan {
			function = LED_FUNCTION_WAN;
			gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
			label = "WAN";
			linux,default-trigger = "netdev";
		};
	};
};