Unverified Commit f89d2243 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files

Merge tag 'samsung-dt64-6.10-2' of... 

Merge tag 'samsung-dt64-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt

Samsung DTS ARM64 changes for v6.10, part two

Few changes exclusively for Google GS101:
1. Add HSI0 and HSI2 clock controllers (CMUs).
2. Add USB 3.1 Dual Role Device (DRD) support.
3. Add UFS (Universal Flash Storage) support.
4. Document bus clocks in pin controllers necessary for accessing
   registers.

* tag 'samsung-dt64-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl
  arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2
  arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]
  arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive
  arm64: dts: exynos: gs101: enable ufs, phy on oriole & define ufs regulator
  arm64: dts: exynos: gs101: Add ufs and ufs-phy dt nodes
  arm64: dts: exynos: gs101: Add the hsi2 sysreg node
  dt-bindings: soc: google: exynos-sysreg: add dedicated hsi2 sysreg compatible
  arm64: dts: exynos: gs101-oriole: enable USB on this board
  arm64: dts: exynos: gs101: add USB & USB-phy nodes
  arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller
  arm64: dts: exynos: gs101: enable cmu-hsi0 clock controller
  dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit
  dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit

Link: https://lore.kernel.org/r/20240504121233.7589-1-krzysztof.kozlowski@linaro.org


Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents cbe240a8 4db286b0

Documentation/devicetree/bindings/clock/google,gs101-clock.yaml

+53 −2
Original line number Diff line number Diff line
@@ -30,16 +30,18 @@ properties: 
      - google,gs101-cmu-top

      - google,gs101-cmu-apm

      - google,gs101-cmu-misc

      - google,gs101-cmu-hsi0

      - google,gs101-cmu-hsi2

      - google,gs101-cmu-peric0

      - google,gs101-cmu-peric1



  clocks:

    minItems: 1

    maxItems: 3

    maxItems: 5



  clock-names:

    minItems: 1

    maxItems: 3

    maxItems: 5



  "#clock-cells":

    const: 1
@@ -72,6 +74,55 @@ allOf: 
          items:

            - const: oscclk



  - if:

      properties:

        compatible:

          contains:

            const: google,gs101-cmu-hsi0



    then:

      properties:

        clocks:

          items:

            - description: External reference clock (24.576 MHz)

            - description: HSI0 bus clock (from CMU_TOP)

            - description: DPGTC (from CMU_TOP)

            - description: USB DRD controller clock (from CMU_TOP)

            - description: USB Display Port debug clock (from CMU_TOP)



        clock-names:

          items:

            - const: oscclk

            - const: bus

            - const: dpgtc

            - const: usb31drd

            - const: usbdpdbg



  - if:

      properties:

        compatible:

          contains:

            enum:

              - google,gs101-cmu-hsi2



    then:

      properties:

        clocks:

          items:

            - description: External reference clock (24.576 MHz)

            - description: High Speed Interface bus clock (from CMU_TOP)

            - description: High Speed Interface pcie clock (from CMU_TOP)

            - description: High Speed Interface ufs clock (from CMU_TOP)

            - description: High Speed Interface mmc clock (from CMU_TOP)



        clock-names:

          items:

            - const: oscclk

            - const: bus

            - const: pcie

            - const: ufs

            - const: mmc



  - if:

      properties:

        compatible:

Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml

+2 −0
Original line number Diff line number Diff line
@@ -15,6 +15,7 @@ properties: 
      - items:

          - enum:

              - google,gs101-apm-sysreg

              - google,gs101-hsi2-sysreg

              - google,gs101-peric0-sysreg

              - google,gs101-peric1-sysreg

              - samsung,exynos3-sysreg
@@ -72,6 +73,7 @@ allOf: 
        compatible:

          contains:

            enum:

              - google,gs101-hsi2-sysreg

              - google,gs101-peric0-sysreg

              - google,gs101-peric1-sysreg

              - samsung,exynos850-cmgp-sysreg

arch/arm64/boot/dts/exynos/google/gs101-oriole.dts

+42 −0
Original line number Diff line number Diff line
@@ -53,6 +53,21 @@ button-power { 
			wakeup-source;

		};

	};



	/* TODO: Remove this once PMIC is implemented  */

	reg_placeholder: regulator-0 {

		compatible = "regulator-fixed";

		regulator-name = "placeholder_reg";

	};



	/* TODO: Remove this once S2MPG11 slave PMIC is implemented  */

	ufs_0_fixed_vcc_reg: regulator-1 {

		compatible = "regulator-fixed";

		regulator-name = "ufs-vcc";

		gpio = <&gpp0 1 GPIO_ACTIVE_HIGH>;

		regulator-boot-on;

		enable-active-high;

	};

};



&ext_24_5m {
@@ -106,6 +121,33 @@ &serial_0 { 
	status = "okay";

};



&ufs_0 {

	status = "okay";

	vcc-supply = <&ufs_0_fixed_vcc_reg>;

};



&ufs_0_phy {

	status = "okay";

};



&usbdrd31 {

	status = "okay";

	vdd10-supply = <&reg_placeholder>;

	vdd33-supply = <&reg_placeholder>;

};



&usbdrd31_dwc3 {

	dr_mode = "otg";

	usb-role-switch;

	role-switch-default-mode = "peripheral";

	maximum-speed = "super-speed-plus";

	status = "okay";

};



&usbdrd31_phy {

	status = "okay";

};



&usi_uart {

	samsung,clkreq-on; /* needed for UART mode */

	status = "okay";

arch/arm64/boot/dts/exynos/google/gs101.dtsi

+128 −0
Original line number Diff line number Diff line
@@ -370,6 +370,8 @@ sysreg_peric0: syscon@10820000 { 
		pinctrl_peric0: pinctrl@10840000 {

			compatible = "google,gs101-pinctrl";

			reg = <0x10840000 0x00001000>;

			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK>;

			clock-names = "pclk";

			interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;

		};
@@ -914,6 +916,8 @@ sysreg_peric1: syscon@10c20000 { 
		pinctrl_peric1: pinctrl@10c40000 {

			compatible = "google,gs101-pinctrl";

			reg = <0x10c40000 0x00001000>;

			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_GPIO_PERIC1_PCLK>;

			clock-names = "pclk";

			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;

		};
@@ -1247,18 +1251,132 @@ spi_13: spi@10d60000 { 
			};

		};



		cmu_hsi0: clock-controller@11000000 {

			compatible = "google,gs101-cmu-hsi0";

			reg = <0x11000000 0x4000>;

			#clock-cells = <1>;



			clocks = <&ext_24_5m>,

				 <&cmu_top CLK_DOUT_CMU_HSI0_BUS>,

				 <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>,

				 <&cmu_top CLK_DOUT_CMU_HSI0_USB31DRD>,

				 <&cmu_top CLK_DOUT_CMU_HSI0_USBDPDBG>;

			clock-names = "oscclk", "bus", "dpgtc", "usb31drd",

				      "usbdpdbg";

		};



		usbdrd31_phy: phy@11100000 {

			compatible = "google,gs101-usb31drd-phy";

			reg = <0x11100000 0x0100>,

			      <0x110f0000 0x0800>,

			      <0x110e0000 0x2800>;

			reg-names = "phy", "pcs", "pma";

			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_ACLK_PHYCTRL>,

				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB20_PHY_REFCLK_26>,

				 <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_ACLK>,

				 <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_PCLK>,

				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USBDPPHY_SCL_APB_PCLK>;

			clock-names = "phy", "ref", "ctrl_aclk", "ctrl_pclk", "scl_pclk";

			samsung,pmu-syscon = <&pmu_system_controller>;

			#phy-cells = <1>;

			status = "disabled";

		};



		usbdrd31: usb@11110000 {

			compatible = "google,gs101-dwusb3";

			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY>,

				<&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_SUSPEND_CLK_26>,

				<&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_ACLK>,

				<&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_PCLK>;

			clock-names = "bus_early", "susp_clk", "link_aclk", "link_pclk";

			#address-cells = <1>;

			#size-cells = <1>;

			ranges = <0x0 0x11110000 0x10000>;

			status = "disabled";



			usbdrd31_dwc3: usb@0 {

				compatible = "snps,dwc3";

				clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_REF_CLK_40>;

				clock-names = "ref";

				reg = <0x0 0x10000>;

				interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;

				phys = <&usbdrd31_phy 0>, <&usbdrd31_phy 1>;

				phy-names = "usb2-phy", "usb3-phy";

				status = "disabled";

			};

		};



		pinctrl_hsi1: pinctrl@11840000 {

			compatible = "google,gs101-pinctrl";

			reg = <0x11840000 0x00001000>;

			/* TODO: update once support for this CMU exists */

			clocks = <0>;

			clock-names = "pclk";

			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;

		};



		cmu_hsi2: clock-controller@14400000 {

			compatible = "google,gs101-cmu-hsi2";

			reg = <0x14400000 0x4000>;

			#clock-cells = <1>;

			clocks = <&ext_24_5m>,

				 <&cmu_top CLK_DOUT_CMU_HSI2_BUS>,

				 <&cmu_top CLK_DOUT_CMU_HSI2_PCIE>,

				 <&cmu_top CLK_DOUT_CMU_HSI2_UFS_EMBD>,

				 <&cmu_top CLK_DOUT_CMU_HSI2_MMC_CARD>;

			clock-names = "oscclk", "bus", "pcie", "ufs", "mmc";

		};



		sysreg_hsi2: syscon@14420000 {

			compatible = "google,gs101-hsi2-sysreg", "syscon";

			reg = <0x14420000 0x10000>;

			clocks = <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>;

		};



		pinctrl_hsi2: pinctrl@14440000 {

			compatible = "google,gs101-pinctrl";

			reg = <0x14440000 0x00001000>;

			clocks = <&cmu_hsi2 CLK_GOUT_HSI2_GPIO_HSI2_PCLK>;

			clock-names = "pclk";

			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;

		};



		ufs_0: ufs@14700000 {

			compatible = "google,gs101-ufs";

			reg = <0x14700000 0x200>,

			      <0x14701100 0x200>,

			      <0x14780000 0xa000>,

			      <0x14600000 0x100>;

			reg-names = "hci", "vs_hci", "unipro", "ufsp";

			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;

			clocks = <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_ACLK>,

				 <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_CLK_UNIPRO>,

				 <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_FMP_CLK>,

				 <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_ACLK>,

				 <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_PCLK>,

				 <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>;

			clock-names = "core_clk", "sclk_unipro_main", "fmp",

				      "aclk", "pclk", "sysreg";

			freq-table-hz = <0 0>, <0 0>, <0 0>, <0 0>, <0 0>, <0 0>;

			pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;

			pinctrl-names = "default";

			phys = <&ufs_0_phy>;

			phy-names = "ufs-phy";

			samsung,sysreg = <&sysreg_hsi2 0x710>;

			status = "disabled";

		};



		ufs_0_phy: phy@14704000 {

			compatible = "google,gs101-ufs-phy";

			reg = <0x14704000 0x3000>;

			reg-names = "phy-pma";

			samsung,pmu-syscon = <&pmu_system_controller>;

			#phy-cells = <0>;

			clocks = <&ext_24_5m>;

			clock-names = "ref_clk";

			status = "disabled";

		};



		cmu_apm: clock-controller@17400000 {

			compatible = "google,gs101-cmu-apm";

			reg = <0x17400000 0x8000>;
@@ -1281,6 +1399,8 @@ pmu_system_controller: system-controller@17460000 { 
		pinctrl_gpio_alive: pinctrl@174d0000 {

			compatible = "google,gs101-pinctrl";

			reg = <0x174d0000 0x00001000>;

			clocks = <&cmu_apm CLK_GOUT_APM_APBIF_GPIO_ALIVE_PCLK>;

			clock-names = "pclk";



			wakeup-interrupt-controller {

				compatible = "google,gs101-wakeup-eint",
@@ -1292,6 +1412,8 @@ wakeup-interrupt-controller { 
		pinctrl_far_alive: pinctrl@174e0000 {

			compatible = "google,gs101-pinctrl";

			reg = <0x174e0000 0x00001000>;

			clocks = <&cmu_apm CLK_GOUT_APM_APBIF_GPIO_FAR_ALIVE_PCLK>;

			clock-names = "pclk";



			wakeup-interrupt-controller {

				compatible = "google,gs101-wakeup-eint",
@@ -1303,11 +1425,17 @@ wakeup-interrupt-controller { 
		pinctrl_gsactrl: pinctrl@17940000 {

			compatible = "google,gs101-pinctrl";

			reg = <0x17940000 0x00001000>;

			/* TODO: update once support for this CMU exists */

			clocks = <0>;

			clock-names = "pclk";

		};



		pinctrl_gsacore: pinctrl@17a80000 {

			compatible = "google,gs101-pinctrl";

			reg = <0x17a80000 0x00001000>;

			/* TODO: update once support for this CMU exists */

			clocks = <0>;

			clock-names = "pclk";

		};



		cmu_top: clock-controller@1e080000 {

include/dt-bindings/clock/google,gs101.h

+116 −0
Original line number Diff line number Diff line
@@ -313,6 +313,122 @@ 
#define CLK_APM_PLL_DIV4_APM				70

#define CLK_APM_PLL_DIV16_APM				71



/* CMU_HSI0 */

#define CLK_FOUT_USB_PLL					1

#define CLK_MOUT_PLL_USB					2

#define CLK_MOUT_HSI0_ALT_USER					3

#define CLK_MOUT_HSI0_BUS_USER					4

#define CLK_MOUT_HSI0_DPGTC_USER				5

#define CLK_MOUT_HSI0_TCXO_USER					6

#define CLK_MOUT_HSI0_USB20_USER				7

#define CLK_MOUT_HSI0_USB31DRD_USER				8

#define CLK_MOUT_HSI0_USBDPDBG_USER				9

#define CLK_MOUT_HSI0_BUS					10

#define CLK_MOUT_HSI0_USB20_REF					11

#define CLK_MOUT_HSI0_USB31DRD					12

#define CLK_DOUT_HSI0_USB31DRD					13

#define CLK_GOUT_HSI0_PCLK					14

#define CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_SUSPEND_CLK_26	15

#define CLK_GOUT_HSI0_CLK_HSI0_ALT				16

#define CLK_GOUT_HSI0_DP_LINK_I_DP_GTC_CLK			17

#define CLK_GOUT_HSI0_DP_LINK_I_PCLK				18

#define CLK_GOUT_HSI0_D_TZPC_HSI0_PCLK				19

#define CLK_GOUT_HSI0_ETR_MIU_I_ACLK				20

#define CLK_GOUT_HSI0_ETR_MIU_I_PCLK				21

#define CLK_GOUT_HSI0_GPC_HSI0_PCLK				22

#define CLK_GOUT_HSI0_LHM_AXI_G_ETR_HSI0_I_CLK			23

#define CLK_GOUT_HSI0_LHM_AXI_P_AOCHSI0_I_CLK			24

#define CLK_GOUT_HSI0_LHM_AXI_P_HSI0_I_CLK			25

#define CLK_GOUT_HSI0_LHS_ACEL_D_HSI0_I_CLK			26

#define CLK_GOUT_HSI0_LHS_AXI_D_HSI0AOC_I_CLK			27

#define CLK_GOUT_HSI0_PPMU_HSI0_AOC_ACLK			28

#define CLK_GOUT_HSI0_PPMU_HSI0_AOC_PCLK			29

#define CLK_GOUT_HSI0_PPMU_HSI0_BUS0_ACLK			30

#define CLK_GOUT_HSI0_PPMU_HSI0_BUS0_PCLK			31

#define CLK_GOUT_HSI0_CLK_HSI0_BUS_CLK				32

#define CLK_GOUT_HSI0_SSMT_USB_ACLK				33

#define CLK_GOUT_HSI0_SSMT_USB_PCLK				34

#define CLK_GOUT_HSI0_SYSMMU_USB_CLK_S2				35

#define CLK_GOUT_HSI0_SYSREG_HSI0_PCLK				36

#define CLK_GOUT_HSI0_UASC_HSI0_CTRL_ACLK			37

#define CLK_GOUT_HSI0_UASC_HSI0_CTRL_PCLK			38

#define CLK_GOUT_HSI0_UASC_HSI0_LINK_ACLK			39

#define CLK_GOUT_HSI0_UASC_HSI0_LINK_PCLK			40

#define CLK_GOUT_HSI0_USB31DRD_ACLK_PHYCTRL			41

#define CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY			42

#define CLK_GOUT_HSI0_USB31DRD_I_USB20_PHY_REFCLK_26		43

#define CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_REF_CLK_40		44

#define CLK_GOUT_HSI0_USB31DRD_I_USBDPPHY_REF_SOC_PLL		45

#define CLK_GOUT_HSI0_USB31DRD_I_USBDPPHY_SCL_APB_PCLK		46

#define CLK_GOUT_HSI0_USB31DRD_I_USBPCS_APB_CLK			47

#define CLK_GOUT_HSI0_USB31DRD_USBDPPHY_I_ACLK			48

#define CLK_GOUT_HSI0_USB31DRD_USBDPPHY_UDBG_I_APB_PCLK		49

#define CLK_GOUT_HSI0_XIU_D0_HSI0_ACLK				50

#define CLK_GOUT_HSI0_XIU_D1_HSI0_ACLK				51

#define CLK_GOUT_HSI0_XIU_P_HSI0_ACLK				52



/* CMU_HSI2 */

#define CLK_MOUT_HSI2_BUS_USER						1

#define CLK_MOUT_HSI2_MMC_CARD_USER					2

#define CLK_MOUT_HSI2_PCIE_USER						3

#define CLK_MOUT_HSI2_UFS_EMBD_USER					4

#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_003_PHY_REFCLK_IN		5

#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_004_PHY_REFCLK_IN		6

#define CLK_GOUT_HSI2_SSMT_PCIE_IA_GEN4A_1_ACLK				7

#define CLK_GOUT_HSI2_SSMT_PCIE_IA_GEN4A_1_PCLK				8

#define CLK_GOUT_HSI2_SSMT_PCIE_IA_GEN4B_1_ACLK				9

#define CLK_GOUT_HSI2_SSMT_PCIE_IA_GEN4B_1_PCLK				10

#define CLK_GOUT_HSI2_D_TZPC_HSI2_PCLK					11

#define CLK_GOUT_HSI2_GPC_HSI2_PCLK					12

#define CLK_GOUT_HSI2_GPIO_HSI2_PCLK					13

#define CLK_GOUT_HSI2_HSI2_CMU_HSI2_PCLK				14

#define CLK_GOUT_HSI2_LHM_AXI_P_HSI2_I_CLK				15

#define CLK_GOUT_HSI2_LHS_ACEL_D_HSI2_I_CLK				16

#define CLK_GOUT_HSI2_MMC_CARD_I_ACLK					17

#define CLK_GOUT_HSI2_MMC_CARD_SDCLKIN					18

#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_003_DBI_ACLK_UG			19

#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_003_MSTR_ACLK_UG			20

#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_003_SLV_ACLK_UG			21

#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_003_I_DRIVER_APB_CLK		22

#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_004_DBI_ACLK_UG			23

#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_004_MSTR_ACLK_UG			24

#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_004_SLV_ACLK_UG			25

#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_004_I_DRIVER_APB_CLK		26

#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCS_PMA_PHY_UDBG_I_APB_PCLK		27

#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCS_PMA_PIPE_PAL_PCIE_I_APB_PCLK	28

#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCS_PMA_PCIEPHY210X2_QCH_I_APB_PCLK	29

#define CLK_GOUT_HSI2_PCIE_IA_GEN4A_1_I_CLK				30

#define CLK_GOUT_HSI2_PCIE_IA_GEN4B_1_I_CLK				31

#define CLK_GOUT_HSI2_PPMU_HSI2_ACLK					32

#define CLK_GOUT_HSI2_PPMU_HSI2_PCLK					33

#define CLK_GOUT_HSI2_QE_MMC_CARD_HSI2_ACLK				34

#define CLK_GOUT_HSI2_QE_MMC_CARD_HSI2_PCLK				35

#define CLK_GOUT_HSI2_QE_PCIE_GEN4A_HSI2_ACLK				36

#define CLK_GOUT_HSI2_QE_PCIE_GEN4A_HSI2_PCLK				37

#define CLK_GOUT_HSI2_QE_PCIE_GEN4B_HSI2_ACLK				38

#define CLK_GOUT_HSI2_QE_PCIE_GEN4B_HSI2_PCLK				39

#define CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_ACLK				40

#define CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_PCLK				41

#define CLK_GOUT_HSI2_CLK_HSI2_BUS_CLK					42

#define CLK_GOUT_HSI2_CLK_HSI2_OSCCLK_CLK				43

#define CLK_GOUT_HSI2_SSMT_HSI2_ACLK					44

#define CLK_GOUT_HSI2_SSMT_HSI2_PCLK					45

#define CLK_GOUT_HSI2_SYSMMU_HSI2_CLK_S2				46

#define CLK_GOUT_HSI2_SYSREG_HSI2_PCLK					47

#define CLK_GOUT_HSI2_UASC_PCIE_GEN4A_DBI_1_ACLK			48

#define CLK_GOUT_HSI2_UASC_PCIE_GEN4A_DBI_1_PCLK			49

#define CLK_GOUT_HSI2_UASC_PCIE_GEN4A_SLV_1_ACLK			50

#define CLK_GOUT_HSI2_UASC_PCIE_GEN4A_SLV_1_PCLK			51

#define CLK_GOUT_HSI2_UASC_PCIE_GEN4B_DBI_1_ACLK			52

#define CLK_GOUT_HSI2_UASC_PCIE_GEN4B_DBI_1_PCLK			53

#define CLK_GOUT_HSI2_UASC_PCIE_GEN4B_SLV_1_ACLK			54

#define CLK_GOUT_HSI2_UASC_PCIE_GEN4B_SLV_1_PCLK			55

#define CLK_GOUT_HSI2_UFS_EMBD_I_ACLK					56

#define CLK_GOUT_HSI2_UFS_EMBD_I_CLK_UNIPRO				57

#define CLK_GOUT_HSI2_UFS_EMBD_I_FMP_CLK				58

#define CLK_GOUT_HSI2_XIU_D_HSI2_ACLK					59

#define CLK_GOUT_HSI2_XIU_P_HSI2_ACLK					60



/* CMU_MISC */

#define CLK_MOUT_MISC_BUS_USER				1

#define CLK_MOUT_MISC_SSS_USER				2