mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/
synced 2026-04-18 06:33:43 -04:00
4d08b3634f
The ROHM BD72720 is a new PMIC with 10 BUCk and 11 LDO regulators. The BD72720 is designed to support using the BUCK10 as a supply for the LDOs 1 to 4. When the BUCK10 is used for this, it can be set to a LDON_HEAD mode. In this mode, the BUCK10 voltage can't be controlled by software, but the voltage is adjusted by PMIC to match the LDO1 .. LDO4 voltages with a given offset. Offset can be 50mV .. 300mV and is changeable at 50mV steps. Add 'ldon-head-microvolt' property to denote a board which is designed to utilize the LDON_HEAD mode. All other properties are already existing. Add dt-binding doc for ROHM BD72720 regulators to make it usable. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/81cb38d0ae1b3fa426e40d5b0a93f69a0f374657.1765804226.git.mazziesaccount@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
149 lines
5.2 KiB
YAML
149 lines
5.2 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/regulator/rohm,bd72720-regulator.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: ROHM BD72720 Power Management Integrated Circuit regulators
|
|
|
|
maintainers:
|
|
- Matti Vaittinen <mazziesaccount@gmail.com>
|
|
|
|
description: |
|
|
This module is part of the ROHM BD72720 MFD device. For more details
|
|
see Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml.
|
|
|
|
The regulator controller is represented as a sub-node of the PMIC node
|
|
on the device tree.
|
|
|
|
Regulator nodes should be named to BUCK_<number> and LDO_<number>.
|
|
The valid names for BD72720 regulator nodes are
|
|
buck1, buck2, buck3, buck4, buck5, buck6, buck7, buck8, buck9, buck10
|
|
ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10, ldo11
|
|
|
|
patternProperties:
|
|
"^ldo([1-9]|1[0-1])$":
|
|
type: object
|
|
description:
|
|
Properties for single LDO regulator.
|
|
$ref: regulator.yaml#
|
|
|
|
properties:
|
|
regulator-name:
|
|
pattern: "^ldo([1-9]|1[0-1])$"
|
|
|
|
rohm,dvs-run-voltage:
|
|
description:
|
|
PMIC default "RUN" state voltage in uV. See below table for
|
|
LDOs which support this. 0 means disabled.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 3300000
|
|
|
|
rohm,dvs-idle-voltage:
|
|
description:
|
|
PMIC default "IDLE" state voltage in uV. See below table for
|
|
LDOs which support this. 0 means disabled.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 3300000
|
|
|
|
rohm,dvs-suspend-voltage:
|
|
description:
|
|
PMIC default "SUSPEND" state voltage in uV. See below table for
|
|
LDOs which support this. 0 means disabled.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 3300000
|
|
|
|
rohm,dvs-lpsr-voltage:
|
|
description:
|
|
PMIC default "deep-idle" state voltage in uV. See below table for
|
|
LDOs which support this. 0 means disabled.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 3300000
|
|
|
|
# Supported default DVS states:
|
|
# ldo | run | idle | suspend | lpsr
|
|
# --------------------------------------------------------------
|
|
# 1, 2, 3, and 4 | supported | supported | supported | supported
|
|
# --------------------------------------------------------------
|
|
# 5 - 11 | supported (*)
|
|
# --------------------------------------------------------------
|
|
#
|
|
# (*) All states use same voltage but have own enable / disable
|
|
# settings. Voltage 0 can be specified for a state to make
|
|
# regulator disabled on that state.
|
|
|
|
unevaluatedProperties: false
|
|
|
|
"^buck([1-9]|10)$":
|
|
type: object
|
|
description:
|
|
Properties for single BUCK regulator.
|
|
$ref: regulator.yaml#
|
|
|
|
properties:
|
|
regulator-name:
|
|
pattern: "^buck([1-9]|10)$"
|
|
|
|
rohm,ldon-head-microvolt:
|
|
description:
|
|
Set this on boards where BUCK10 is used to supply LDOs 1-4. The bucki
|
|
voltage will be changed by the PMIC to follow the LDO output voltages
|
|
with the offset voltage given here. This will improve the LDO efficiency.
|
|
minimum: 50000
|
|
maximum: 300000
|
|
|
|
rohm,dvs-run-voltage:
|
|
description:
|
|
PMIC default "RUN" state voltage in uV. See below table for
|
|
bucks which support this. 0 means disabled.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 3300000
|
|
|
|
rohm,dvs-idle-voltage:
|
|
description:
|
|
PMIC default "IDLE" state voltage in uV. See below table for
|
|
bucks which support this. 0 means disabled.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 3300000
|
|
|
|
rohm,dvs-suspend-voltage:
|
|
description:
|
|
PMIC default "SUSPEND" state voltage in uV. See below table for
|
|
bucks which support this. 0 means disabled.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 3300000
|
|
|
|
rohm,dvs-lpsr-voltage:
|
|
description:
|
|
PMIC default "deep-idle" state voltage in uV. See below table for
|
|
bucks which support this. 0 means disabled.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 3300000
|
|
|
|
# Supported default DVS states:
|
|
# buck | run | idle | suspend | lpsr
|
|
# --------------------------------------------------------------
|
|
# 1, 2, 3, and 4 | supported | supported | supported | supported
|
|
# --------------------------------------------------------------
|
|
# 5 - 10 | supported (*)
|
|
# --------------------------------------------------------------
|
|
#
|
|
# (*) All states use same voltage but have own enable / disable
|
|
# settings. Voltage 0 can be specified for a state to make
|
|
# regulator disabled on that state.
|
|
|
|
required:
|
|
- regulator-name
|
|
|
|
unevaluatedProperties: false
|
|
|
|
additionalProperties: false
|